SMART report, but not a test

[ShadowSkippie]

Sorry if this has been asked before, but I did not see anything when I did a brief search

I'd like to know how I can get the SMART report from TrueNAS
I don't want to test the drive, just pull the reported numbers on the disk.

When I look at the SMART tool in the GUI, all it gives me is short of long test.
But nothing about just pulling the already logged information on the disk and emailing that through.

How do I go about creating and scheduling something like this.
If upon reading through this information something seems off, then I would manually run a check on the disk

 

[LarsR]

take a look at https://www.truenas.com/community/resources/multi_report-sh-version-for-core-and-scale.179/ it's a script that would do what you want and send you smart reports for your disks via e-mail

 

[ShadowSkippie]

perfect

Thank you very much for this information :)

 

[Davvo]

manually you have to use smartctl -a /dev/adX where x is the letter of the drive you want to see the report.