Received a critical alert "Device: /dev/ada3, Self-Test Log error count increased from 0 to 1." While searching I found this blog post, Fixing FreeNAS error: Currently unreadable (pending) sectors, that indicates it will fix the disk. I think that I understand the steps well enough to follow them, I do not know if this is a reasonable course of action. It appears that the error is always the same block so maybe I could dd the single sector and repair the the disk.
If I repair the disk and the error is no longer reported, should I consider the disk safe? Or should I replace the disk and be done with it because it is going to fail soon.
I have a single 5 disk pool, and this is the only WD drive the others are Seagates.
TIA.
If I repair the disk and the error is no longer reported, should I consider the disk safe? Or should I replace the disk and be done with it because it is going to fail soon.
I have a single 5 disk pool, and this is the only WD drive the others are Seagates.
TIA.
Code:
root@freenas[~]# smartctl -a /dev/ada3
smartctl 7.2 2020-12-30 r5155 [FreeBSD 12.2-RELEASE-p12 amd64] (local build)
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Western Digital Red
Device Model: WDC WD40EFRX-68N32N0
Serial Number: WD-WCC7K5ZJNCNC
LU WWN Device Id: 5 0014ee 2ba96fd5c
Firmware Version: 82.00A82
User Capacity: 4,000,787,030,016 bytes [4.00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 5400 rpm
Form Factor: 3.5 inches
Device is: In smartctl database [for details use: -P show]
ATA Version is: ACS-3 T13/2161-D revision 5
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Sat Oct 8 11:06:43 2022 CDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (44640) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 473) minutes.
Conveyance self-test routine
recommended polling time: ( 5) minutes.
SCT capabilities: (0x303d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0
3 Spin_Up_Time 0x0027 237 163 021 Pre-fail Always - 3150
4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 113
5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0
7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0
9 Power_On_Hours 0x0032 058 058 000 Old_age Always - 30911
10 Spin_Retry_Count 0x0032 100 100 000 Old_age Always - 0
11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 113
192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 96
193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 1013
194 Temperature_Celsius 0x0022 121 099 000 Old_age Always - 29
196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0
197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0030 100 253 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline - 1
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 30899 -
# 2 Extended offline Completed: read failure 90% 30732 126481952
# 3 Short offline Completed without error 00% 30731 -
# 4 Short offline Completed without error 00% 30563 -
# 5 Short offline Completed without error 00% 30395 -
# 6 Short offline Completed without error 00% 30227 -
# 7 Short offline Completed without error 00% 30060 -
# 8 Extended offline Completed: read failure 90% 30013 126481952
# 9 Short offline Completed without error 00% 29892 -
#10 Short offline Completed without error 00% 29724 -
#11 Short offline Completed without error 00% 29556 -
#12 Short offline Completed without error 00% 29388 -
#13 Extended offline Completed: read failure 90% 29269 126481952
#14 Short offline Completed without error 00% 29220 -
#15 Short offline Completed without error 00% 29053 -
#16 Short offline Completed without error 00% 28885 -
#17 Short offline Completed without error 00% 28717 -
#18 Short offline Completed without error 00% 28549 -
#19 Extended offline Completed: read failure 90% 28526 126481952
#20 Short offline Completed without error 00% 28381 -
#21 Short offline Completed without error 00% 28214 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
