zoo
Dabbler
- Joined
- Jul 11, 2011
- Messages
- 10
Hi all,
A few days ago I recieved an automated email containing:
The following warning/error was logged by the smartd daemon:
Device: /dev/ada0, unable to open device
I rebooted the machine and everything seemed normal again. Then I completed a backup and ran extended smart tests on every drive in the array. I had been running short ones in the past. While none of the drives "failed" the test, a few of them have ATA errors logged. Should I be worried? I do have two new spare drives for this occasion tested and ready to go but I'm not sure if I'm just being paranoid since the errors were logged thousands of hours prior.
I attached the smartctl logs for the 6 drives below if anyone has insight..thanks.
A few days ago I recieved an automated email containing:
The following warning/error was logged by the smartd daemon:
Device: /dev/ada0, unable to open device
I rebooted the machine and everything seemed normal again. Then I completed a backup and ran extended smart tests on every drive in the array. I had been running short ones in the past. While none of the drives "failed" the test, a few of them have ATA errors logged. Should I be worried? I do have two new spare drives for this occasion tested and ready to go but I'm not sure if I'm just being paranoid since the errors were logged thousands of hours prior.
I attached the smartctl logs for the 6 drives below if anyone has insight..thanks.
Code:
/# smartctl -a /dev/ada0
smartctl 5.43 2012-06-30 r3573 [FreeBSD 8.3-RELEASE-p4 amd64] (local build)
Copyright (C) 2002-12 by Bruce Allen, http://smartmontools.sourceforge.net
=== START OF INFORMATION SECTION ===
Model Family: SAMSUNG SpinPoint F3 EG
Device Model: SAMSUNG HD203WI
Firmware Version: 1AN10003
User Capacity: 2,000,398,934,016 bytes [2.00 TB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: 8
ATA Standard is: ATA-8-ACS revision 6
Local Time is: Fri Nov 23 18:12:28 2012 EST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (26280) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 438) minutes.
SCT capabilities: (0x003f) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 100 100 051 Pre-fail Always - 678
2 Throughput_Performance 0x0026 055 055 000 Old_age Always - 23926
3 Spin_Up_Time 0x0023 061 061 025 Pre-fail Always - 11927
4 Start_Stop_Count 0x0032 094 094 000 Old_age Always - 6567
5 Reallocated_Sector_Ct 0x0033 252 252 010 Pre-fail Always - 0
7 Seek_Error_Rate 0x002e 252 252 051 Old_age Always - 0
8 Seek_Time_Performance 0x0024 252 252 015 Old_age Offline - 0
9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 13302
10 Spin_Retry_Count 0x0032 252 252 051 Old_age Always - 0
11 Calibration_Retry_Count 0x0032 252 252 000 Old_age Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 138
191 G-Sense_Error_Rate 0x0022 100 100 000 Old_age Always - 3858
192 Power-Off_Retract_Count 0x0022 252 252 000 Old_age Always - 0
194 Temperature_Celsius 0x0002 064 064 000 Old_age Always - 23 (Min/Max 16/29)
195 Hardware_ECC_Recovered 0x003a 100 100 000 Old_age Always - 0
196 Reallocated_Event_Count 0x0032 252 252 000 Old_age Always - 0
197 Current_Pending_Sector 0x0032 252 252 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0030 252 252 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0036 100 100 000 Old_age Always - 114
200 Multi_Zone_Error_Rate 0x002a 100 100 000 Old_age Always - 234
223 Load_Retry_Count 0x0032 252 252 000 Old_age Always - 0
225 Load_Cycle_Count 0x0032 094 094 000 Old_age Always - 70640
SMART Error Log Version: 1
ATA Error Count: 71 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 71 occurred at disk power-on lifetime: 2650 hours (110 days + 10 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 20 00 00 00 e0 Error: ICRC, ABRT 32 sectors at LBA = 0x00000000 = 0
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 10 10 00 00 e0 00 00:00:00.110 READ DMA
c8 00 10 10 00 00 e0 00 00:00:00.110 READ DMA
c8 00 10 80 00 00 e0 00 00:00:00.110 READ DMA
c8 00 10 80 00 00 e0 00 00:00:00.109 READ DMA
c8 00 10 80 00 00 e0 00 00:00:00.109 READ DMA
Error 70 occurred at disk power-on lifetime: 2650 hours (110 days + 10 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 90 00 00 00 e0 Error: ICRC, ABRT 144 sectors at LBA = 0x00000000 = 0
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 10 80 00 00 e0 00 00:00:00.110 READ DMA
c8 00 10 80 00 00 e0 00 00:00:00.110 READ DMA
c8 00 10 80 00 00 e0 00 00:00:00.109 READ DMA
c8 00 10 80 00 00 e0 00 00:00:00.109 READ DMA
c8 00 10 80 00 00 e0 00 00:00:00.108 READ DMA
Error 69 occurred at disk power-on lifetime: 2650 hours (110 days + 10 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 90 00 00 00 e0 Error: ICRC, ABRT 144 sectors at LBA = 0x00000000 = 0
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 10 80 00 00 e0 00 00:00:00.109 READ DMA
c8 00 10 80 00 00 e0 00 00:00:00.109 READ DMA
c8 00 10 80 00 00 e0 00 00:00:00.109 READ DMA
c8 00 10 80 00 00 e0 00 00:00:00.108 READ DMA
c8 00 10 80 00 00 e0 00 00:00:00.108 READ DMA
Error 68 occurred at disk power-on lifetime: 2650 hours (110 days + 10 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 90 00 00 00 e0 Error: ICRC, ABRT 144 sectors at LBA = 0x00000000 = 0
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 10 80 00 00 e0 00 00:00:00.109 READ DMA
c8 00 10 80 00 00 e0 00 00:00:00.109 READ DMA
c8 00 10 80 00 00 e0 00 00:00:00.108 READ DMA
c8 00 10 80 00 00 e0 00 00:00:00.108 READ DMA
25 00 01 af 88 e0 40 00 00:00:00.108 READ DMA EXT
Error 67 occurred at disk power-on lifetime: 2650 hours (110 days + 10 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 90 00 00 00 e0 Error: ICRC, ABRT 144 sectors at LBA = 0x00000000 = 0
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 10 80 00 00 e0 00 00:00:00.108 READ DMA
c8 00 10 80 00 00 e0 00 00:00:00.108 READ DMA
c8 00 10 80 00 00 e0 00 00:00:00.108 READ DMA
25 00 01 af 88 e0 40 00 00:00:00.108 READ DMA EXT
25 00 01 af 88 e0 40 00 00:00:00.107 READ DMA EXT
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed without error 00% 13288 -
# 2 Short offline Completed without error 00% 13280 -
# 3 Short offline Completed without error 00% 13253 -
# 4 Short offline Completed without error 00% 10299 -
# 5 Short offline Completed without error 00% 10131 -
# 6 Short offline Completed without error 00% 9964 -
# 7 Short offline Completed without error 00% 9916 -
# 8 Short offline Completed without error 00% 9764 -
# 9 Short offline Completed without error 00% 9596 -
#10 Short offline Completed without error 00% 9428 -
#11 Short offline Completed without error 00% 9260 -
#12 Short offline Completed without error 00% 9188 -
#13 Short offline Completed without error 00% 9020 -
#14 Short offline Completed without error 00% 8852 -
#15 Short offline Completed without error 00% 8684 -
#16 Short offline Completed without error 00% 8516 -
#17 Short offline Completed without error 00% 8468 -
#18 Short offline Completed without error 00% 8301 -
#19 Short offline Completed without error 00% 8133 -
#20 Short offline Completed without error 00% 7965 -
#21 Short offline Completed without error 00% 7797 -
Note: selective self-test log revision number (0) not 1 implies that no selective self-test has ever been run
SMART Selective self-test log data structure revision number 0
Note: revision number not 1 implies that no selective self-test has ever been run
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Completed [00% left] (0-65535)
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.Code:
/# smartctl -a /dev/ada1
smartctl 5.43 2012-06-30 r3573 [FreeBSD 8.3-RELEASE-p4 amd64] (local build)
Copyright (C) 2002-12 by Bruce Allen, http://smartmontools.sourceforge.net
=== START OF INFORMATION SECTION ===
Model Family: SAMSUNG SpinPoint F4 EG (AFT)
Device Model: SAMSUNG HD204UI
Firmware Version: 1AQ10001
User Capacity: 2,000,398,934,016 bytes [2.00 TB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: 8
ATA Standard is: ATA-8-ACS revision 6
Local Time is: Fri Nov 23 18:12:49 2012 EST
==> WARNING: Using smartmontools or hdparm with this
drive may result in data loss due to a firmware bug.
****** THIS DRIVE MAY OR MAY NOT BE AFFECTED! ******
Buggy and fixed firmware report same version number!
See the following web pages for details:
http://knowledge.seagate.com/articles/en_US/FAQ/223571en
http://sourceforge.net/apps/trac/smartmontools/wiki/SamsungF4EGBadBlocks
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (19860) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 331) minutes.
SCT capabilities: (0x003f) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 100 100 051 Pre-fail Always - 1
2 Throughput_Performance 0x0026 055 055 000 Old_age Always - 18103
3 Spin_Up_Time 0x0023 067 044 025 Pre-fail Always - 10060
4 Start_Stop_Count 0x0032 095 095 000 Old_age Always - 5976
5 Reallocated_Sector_Ct 0x0033 252 252 010 Pre-fail Always - 0
7 Seek_Error_Rate 0x002e 252 252 051 Old_age Always - 0
8 Seek_Time_Performance 0x0024 252 252 015 Old_age Offline - 0
9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 10652
10 Spin_Retry_Count 0x0032 252 252 051 Old_age Always - 0
11 Calibration_Retry_Count 0x0032 252 252 000 Old_age Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 96
181 Program_Fail_Cnt_Total 0x0022 100 100 000 Old_age Always - 355
191 G-Sense_Error_Rate 0x0022 100 100 000 Old_age Always - 7696
192 Power-Off_Retract_Count 0x0022 252 252 000 Old_age Always - 0
194 Temperature_Celsius 0x0002 064 064 000 Old_age Always - 25 (Min/Max 17/34)
195 Hardware_ECC_Recovered 0x003a 100 100 000 Old_age Always - 0
196 Reallocated_Event_Count 0x0032 252 252 000 Old_age Always - 0
197 Current_Pending_Sector 0x0032 252 252 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0030 252 252 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0036 100 100 000 Old_age Always - 7
200 Multi_Zone_Error_Rate 0x002a 100 100 000 Old_age Always - 39
223 Load_Retry_Count 0x0032 252 252 000 Old_age Always - 0
225 Load_Cycle_Count 0x0032 100 100 000 Old_age Always - 6003
SMART Error Log Version: 1
ATA Error Count: 1
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 1 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 00 00 00 00 00
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
ec 00 01 01 00 00 00 00 00:00:00.177 IDENTIFY DEVICE
ec 00 01 01 00 00 00 00 00:00:00.177 IDENTIFY DEVICE
08 00 01 01 00 00 00 00 00:00:00.177 DEVICE RESET
00 00 01 01 00 00 40 00 00:00:00.155 NOP [Abort queued commands]
29 ff 01 af 82 e0 40 00 00:00:00.106 READ MULTIPLE EXT
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed without error 00% 10648 -
# 2 Short offline Completed without error 00% 10602 -
# 3 Short offline Completed without error 00% 7646 -
# 4 Short offline Completed without error 00% 7479 -
# 5 Short offline Completed without error 00% 7313 -
# 6 Short offline Completed without error 00% 7265 -
# 7 Short offline Completed without error 00% 7113 -
# 8 Short offline Completed without error 00% 6945 -
# 9 Short offline Completed without error 00% 6777 -
#10 Short offline Completed without error 00% 6609 -
#11 Short offline Completed without error 00% 6537 -
#12 Short offline Completed without error 00% 6369 -
#13 Short offline Completed without error 00% 6201 -
#14 Short offline Completed without error 00% 6033 -
#15 Short offline Completed without error 00% 5865 -
#16 Short offline Completed without error 00% 5817 -
#17 Short offline Completed without error 00% 5650 -
#18 Short offline Completed without error 00% 5482 -
#19 Short offline Completed without error 00% 5314 -
#20 Short offline Completed without error 00% 5146 -
#21 Short offline Completed without error 00% 5074 -
Note: selective self-test log revision number (0) not 1 implies that no selective self-test has ever been run
SMART Selective self-test log data structure revision number 0
Note: revision number not 1 implies that no selective self-test has ever been run
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Completed [00% left] (0-65535)
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.Code:
/# smartctl -a /dev/ada2
smartctl 5.43 2012-06-30 r3573 [FreeBSD 8.3-RELEASE-p4 amd64] (local build)
Copyright (C) 2002-12 by Bruce Allen, http://smartmontools.sourceforge.net
=== START OF INFORMATION SECTION ===
Model Family: SAMSUNG SpinPoint F4 EG (AFT)
Device Model: SAMSUNG HD204UI
Firmware Version: 1AQ10001
User Capacity: 2,000,398,934,016 bytes [2.00 TB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: 8
ATA Standard is: ATA-8-ACS revision 6
Local Time is: Fri Nov 23 18:13:01 2012 EST
==> WARNING: Using smartmontools or hdparm with this
drive may result in data loss due to a firmware bug.
****** THIS DRIVE MAY OR MAY NOT BE AFFECTED! ******
Buggy and fixed firmware report same version number!
See the following web pages for details:
http://knowledge.seagate.com/articles/en_US/FAQ/223571en
http://sourceforge.net/apps/trac/smartmontools/wiki/SamsungF4EGBadBlocks
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (20580) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 343) minutes.
SCT capabilities: (0x003f) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 100 100 051 Pre-fail Always - 86
2 Throughput_Performance 0x0026 055 055 000 Old_age Always - 18722
3 Spin_Up_Time 0x0023 067 045 025 Pre-fail Always - 10017
4 Start_Stop_Count 0x0032 095 095 000 Old_age Always - 5760
5 Reallocated_Sector_Ct 0x0033 252 252 010 Pre-fail Always - 0
7 Seek_Error_Rate 0x002e 252 252 051 Old_age Always - 0
8 Seek_Time_Performance 0x0024 252 252 015 Old_age Offline - 0
9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 10663
10 Spin_Retry_Count 0x0032 252 252 051 Old_age Always - 0
11 Calibration_Retry_Count 0x0032 252 252 000 Old_age Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 78
181 Program_Fail_Cnt_Total 0x0022 100 100 000 Old_age Always - 347
191 G-Sense_Error_Rate 0x0022 100 100 000 Old_age Always - 7144
192 Power-Off_Retract_Count 0x0022 252 252 000 Old_age Always - 0
194 Temperature_Celsius 0x0002 064 064 000 Old_age Always - 24 (Min/Max 16/35)
195 Hardware_ECC_Recovered 0x003a 100 100 000 Old_age Always - 0
196 Reallocated_Event_Count 0x0032 252 252 000 Old_age Always - 0
197 Current_Pending_Sector 0x0032 252 252 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0030 252 252 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0036 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x002a 100 100 000 Old_age Always - 42
223 Load_Retry_Count 0x0032 252 252 000 Old_age Always - 0
225 Load_Cycle_Count 0x0032 100 100 000 Old_age Always - 5782
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed without error 00% 10660 -
# 2 Short offline Completed without error 00% 10614 -
# 3 Short offline Completed without error 00% 7648 -
# 4 Short offline Completed without error 00% 7480 -
# 5 Short offline Completed without error 00% 7312 -
# 6 Short offline Completed without error 00% 7264 -
# 7 Short offline Completed without error 00% 7112 -
# 8 Short offline Completed without error 00% 6944 -
# 9 Short offline Completed without error 00% 6776 -
#10 Short offline Completed without error 00% 6608 -
#11 Short offline Completed without error 00% 6536 -
#12 Short offline Completed without error 00% 6368 -
#13 Short offline Completed without error 00% 6200 -
#14 Short offline Completed without error 00% 6032 -
#15 Short offline Completed without error 00% 5864 -
#16 Short offline Completed without error 00% 5816 -
#17 Short offline Completed without error 00% 5648 -
#18 Short offline Completed without error 00% 5480 -
#19 Short offline Completed without error 00% 5312 -
#20 Short offline Completed without error 00% 5144 -
#21 Short offline Completed without error 00% 5072 -
Note: selective self-test log revision number (0) not 1 implies that no selective self-test has ever been run
SMART Selective self-test log data structure revision number 0
Note: revision number not 1 implies that no selective self-test has ever been run
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Completed [00% left] (0-65535)
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.Code:
/# smartctl -a /dev/ada3
smartctl 5.43 2012-06-30 r3573 [FreeBSD 8.3-RELEASE-p4 amd64] (local build)
Copyright (C) 2002-12 by Bruce Allen, http://smartmontools.sourceforge.net
=== START OF INFORMATION SECTION ===
Model Family: SAMSUNG SpinPoint F3 EG
Device Model: SAMSUNG HD203WI
Firmware Version: 1AN10003
User Capacity: 2,000,398,934,016 bytes [2.00 TB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: 8
ATA Standard is: ATA-8-ACS revision 6
Local Time is: Fri Nov 23 18:13:08 2012 EST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (26340) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 439) minutes.
SCT capabilities: (0x003f) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 100 100 051 Pre-fail Always - 402
2 Throughput_Performance 0x0026 055 055 000 Old_age Always - 23985
3 Spin_Up_Time 0x0023 060 060 025 Pre-fail Always - 12159
4 Start_Stop_Count 0x0032 094 094 000 Old_age Always - 6459
5 Reallocated_Sector_Ct 0x0033 252 252 010 Pre-fail Always - 0
7 Seek_Error_Rate 0x002e 252 252 051 Old_age Always - 0
8 Seek_Time_Performance 0x0024 252 252 015 Old_age Offline - 0
9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 13166
10 Spin_Retry_Count 0x0032 252 252 051 Old_age Always - 0
11 Calibration_Retry_Count 0x0032 252 252 000 Old_age Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 137
191 G-Sense_Error_Rate 0x0022 100 100 000 Old_age Always - 3992
192 Power-Off_Retract_Count 0x0022 252 252 000 Old_age Always - 0
194 Temperature_Celsius 0x0002 064 064 000 Old_age Always - 25 (Min/Max 18/30)
195 Hardware_ECC_Recovered 0x003a 100 100 000 Old_age Always - 0
196 Reallocated_Event_Count 0x0032 252 252 000 Old_age Always - 0
197 Current_Pending_Sector 0x0032 252 252 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0030 252 252 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0036 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x002a 100 100 000 Old_age Always - 219
223 Load_Retry_Count 0x0032 252 252 000 Old_age Always - 0
225 Load_Cycle_Count 0x0032 094 094 000 Old_age Always - 69718
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed without error 00% 13164 -
# 2 Short offline Completed without error 00% 13116 -
# 3 Short offline Completed without error 00% 10159 -
# 4 Short offline Completed without error 00% 9992 -
# 5 Short offline Completed without error 00% 9825 -
# 6 Short offline Completed without error 00% 9777 -
# 7 Short offline Completed without error 00% 9625 -
# 8 Short offline Completed without error 00% 9457 -
# 9 Short offline Completed without error 00% 9289 -
#10 Short offline Completed without error 00% 9121 -
#11 Short offline Completed without error 00% 9049 -
#12 Short offline Completed without error 00% 8881 -
#13 Short offline Completed without error 00% 8713 -
#14 Short offline Completed without error 00% 8545 -
#15 Short offline Completed without error 00% 8377 -
#16 Short offline Completed without error 00% 8329 -
#17 Short offline Completed without error 00% 8161 -
#18 Short offline Completed without error 00% 7993 -
#19 Short offline Completed without error 00% 7825 -
#20 Short offline Completed without error 00% 7657 -
#21 Short offline Completed without error 00% 7586 -
Note: selective self-test log revision number (0) not 1 implies that no selective self-test has ever been run
SMART Selective self-test log data structure revision number 0
Note: revision number not 1 implies that no selective self-test has ever been run
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Completed [00% left] (0-65535)
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.Code:
smartctl -a /dev/ada4
smartctl 5.43 2012-06-30 r3573 [FreeBSD 8.3-RELEASE-p4 amd64] (local build)
Copyright (C) 2002-12 by Bruce Allen, http://smartmontools.sourceforge.net
=== START OF INFORMATION SECTION ===
Model Family: SAMSUNG SpinPoint F4 EG (AFT)
Device Model: SAMSUNG HD204UI
Firmware Version: 1AQ10001
User Capacity: 2,000,398,934,016 bytes [2.00 TB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: 8
ATA Standard is: ATA-8-ACS revision 6
Local Time is: Fri Nov 23 18:13:18 2012 EST
==> WARNING: Using smartmontools or hdparm with this
drive may result in data loss due to a firmware bug.
****** THIS DRIVE MAY OR MAY NOT BE AFFECTED! ******
Buggy and fixed firmware report same version number!
See the following web pages for details:
http://knowledge.seagate.com/articles/en_US/FAQ/223571en
http://sourceforge.net/apps/trac/smartmontools/wiki/SamsungF4EGBadBlocks
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (21360) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 356) minutes.
SCT capabilities: (0x003f) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 100 100 051 Pre-fail Always - 0
2 Throughput_Performance 0x0026 056 056 000 Old_age Always - 19432
3 Spin_Up_Time 0x0023 066 066 025 Pre-fail Always - 10341
4 Start_Stop_Count 0x0032 094 094 000 Old_age Always - 6704
5 Reallocated_Sector_Ct 0x0033 252 252 010 Pre-fail Always - 0
7 Seek_Error_Rate 0x002e 252 252 051 Old_age Always - 0
8 Seek_Time_Performance 0x0024 252 252 015 Old_age Offline - 0
9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 10972
10 Spin_Retry_Count 0x0032 252 252 051 Old_age Always - 0
11 Calibration_Retry_Count 0x0032 252 252 000 Old_age Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 139
181 Program_Fail_Cnt_Total 0x0022 100 100 000 Old_age Always - 21681288
191 G-Sense_Error_Rate 0x0022 100 100 000 Old_age Always - 9077
192 Power-Off_Retract_Count 0x0022 252 252 000 Old_age Always - 0
194 Temperature_Celsius 0x0002 064 064 000 Old_age Always - 25 (Min/Max 18/35)
195 Hardware_ECC_Recovered 0x003a 100 100 000 Old_age Always - 0
196 Reallocated_Event_Count 0x0032 252 252 000 Old_age Always - 0
197 Current_Pending_Sector 0x0032 252 252 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0030 252 252 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0036 097 097 000 Old_age Always - 1672
200 Multi_Zone_Error_Rate 0x002a 100 100 000 Old_age Always - 150
223 Load_Retry_Count 0x0032 252 252 000 Old_age Always - 0
225 Load_Cycle_Count 0x0032 100 100 000 Old_age Always - 6728
SMART Error Log Version: 1
ATA Error Count: 3
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 3 occurred at disk power-on lifetime: 366 hours (15 days + 6 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 01 7f 02 40 e0 Error: ICRC, ABRT at LBA = 0x0040027f = 4194943
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
ca 00 08 78 02 40 e0 02 00:01:56.947 WRITE DMA
ca 00 08 78 02 40 e0 02 00:01:56.947 WRITE DMA
ea 00 00 00 00 00 40 02 00:01:56.947 FLUSH CACHE EXT
35 00 20 a8 bd 40 40 02 00:01:56.947 WRITE DMA EXT
35 00 10 58 8b 40 40 02 00:01:56.947 WRITE DMA EXT
Error 2 occurred at disk power-on lifetime: 365 hours (15 days + 5 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 01 97 03 40 e0 Error: ICRC, ABRT at LBA = 0x00400397 = 4195223
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
ca 00 08 90 03 40 e0 02 00:01:19.156 WRITE DMA
ca 00 08 90 03 40 e0 02 00:01:19.156 WRITE DMA
ca 00 08 90 01 40 e0 02 00:01:19.156 WRITE DMA
ea 00 00 00 00 00 40 02 00:01:19.156 FLUSH CACHE EXT
35 00 08 70 a1 40 40 02 00:01:19.156 WRITE DMA EXT
Error 1 occurred at disk power-on lifetime: 365 hours (15 days + 5 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 01 4f 02 40 e0 Error: ICRC, ABRT at LBA = 0x0040024f = 4194895
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
ca 00 08 48 02 40 e0 02 00:01:19.111 WRITE DMA
ca 00 08 48 02 40 e0 02 00:01:19.111 WRITE DMA
ea 00 00 00 00 00 40 02 00:01:19.111 FLUSH CACHE EXT
35 00 30 08 74 40 40 02 00:01:19.111 WRITE DMA EXT
35 00 10 68 45 40 40 02 00:01:19.111 WRITE DMA EXT
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed without error 00% 10969 -
# 2 Short offline Completed without error 00% 10922 -
# 3 Short offline Completed without error 00% 7961 -
# 4 Short offline Completed without error 00% 7794 -
# 5 Short offline Completed without error 00% 7626 -
# 6 Short offline Completed without error 00% 7578 -
# 7 Short offline Completed without error 00% 7426 -
# 8 Short offline Completed without error 00% 7258 -
# 9 Short offline Completed without error 00% 7090 -
#10 Short offline Completed without error 00% 6922 -
#11 Short offline Completed without error 00% 6850 -
#12 Short offline Completed without error 00% 6682 -
#13 Short offline Completed without error 00% 6514 -
#14 Short offline Completed without error 00% 6346 -
#15 Short offline Completed without error 00% 6178 -
#16 Short offline Completed without error 00% 6130 -
#17 Short offline Completed without error 00% 5962 -
#18 Short offline Completed without error 00% 5794 -
#19 Short offline Completed without error 00% 5626 -
#20 Short offline Completed without error 00% 5458 -
#21 Short offline Completed without error 00% 5386 -
Note: selective self-test log revision number (0) not 1 implies that no selective self-test has ever been run
SMART Selective self-test log data structure revision number 0
Note: revision number not 1 implies that no selective self-test has ever been run
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Completed [00% left] (0-65535)
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.Code:
/# smartctl -a /dev/ada5
smartctl 5.43 2012-06-30 r3573 [FreeBSD 8.3-RELEASE-p4 amd64] (local build)
Copyright (C) 2002-12 by Bruce Allen, http://smartmontools.sourceforge.net
=== START OF INFORMATION SECTION ===
Model Family: SAMSUNG SpinPoint F4 EG (AFT)
Device Model: SAMSUNG HD204UI
Firmware Version: 1AQ10001
User Capacity: 2,000,398,934,016 bytes [2.00 TB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: 8
ATA Standard is: ATA-8-ACS revision 6
Local Time is: Fri Nov 23 18:13:35 2012 EST
==> WARNING: Using smartmontools or hdparm with this
drive may result in data loss due to a firmware bug.
****** THIS DRIVE MAY OR MAY NOT BE AFFECTED! ******
Buggy and fixed firmware report same version number!
See the following web pages for details:
http://knowledge.seagate.com/articles/en_US/FAQ/223571en
http://sourceforge.net/apps/trac/smartmontools/wiki/SamsungF4EGBadBlocks
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (20160) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 336) minutes.
SCT capabilities: (0x003f) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 100 100 051 Pre-fail Always - 0
2 Throughput_Performance 0x0026 056 056 000 Old_age Always - 18324
3 Spin_Up_Time 0x0023 067 044 025 Pre-fail Always - 10155
4 Start_Stop_Count 0x0032 094 094 000 Old_age Always - 6765
5 Reallocated_Sector_Ct 0x0033 252 252 010 Pre-fail Always - 0
7 Seek_Error_Rate 0x002e 252 252 051 Old_age Always - 0
8 Seek_Time_Performance 0x0024 252 252 015 Old_age Offline - 0
9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 10665
10 Spin_Retry_Count 0x0032 252 252 051 Old_age Always - 0
11 Calibration_Retry_Count 0x0032 252 252 000 Old_age Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 103
181 Program_Fail_Cnt_Total 0x0022 100 100 000 Old_age Always - 363
191 G-Sense_Error_Rate 0x0022 096 096 000 Old_age Always - 47818
192 Power-Off_Retract_Count 0x0022 252 252 000 Old_age Always - 0
194 Temperature_Celsius 0x0002 064 064 000 Old_age Always - 26 (Min/Max 18/32)
195 Hardware_ECC_Recovered 0x003a 100 100 000 Old_age Always - 0
196 Reallocated_Event_Count 0x0032 252 252 000 Old_age Always - 0
197 Current_Pending_Sector 0x0032 252 252 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0030 252 252 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0036 100 100 000 Old_age Always - 13
200 Multi_Zone_Error_Rate 0x002a 100 100 000 Old_age Always - 1164
223 Load_Retry_Count 0x0032 252 252 000 Old_age Always - 0
225 Load_Cycle_Count 0x0032 100 100 000 Old_age Always - 6774
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed without error 00% 10661 -
# 2 Short offline Completed without error 00% 10615 -
# 3 Short offline Completed without error 00% 7653 -
# 4 Short offline Completed without error 00% 7485 -
# 5 Short offline Completed without error 00% 7317 -
# 6 Short offline Completed without error 00% 7269 -
# 7 Short offline Completed without error 00% 7117 -
# 8 Short offline Completed without error 00% 6949 -
# 9 Short offline Completed without error 00% 6781 -
#10 Short offline Completed without error 00% 6613 -
#11 Short offline Completed without error 00% 6541 -
#12 Short offline Completed without error 00% 6373 -
#13 Short offline Completed without error 00% 6205 -
#14 Short offline Completed without error 00% 6037 -
#15 Short offline Completed without error 00% 5869 -
#16 Short offline Completed without error 00% 5821 -
#17 Short offline Completed without error 00% 5653 -
#18 Short offline Completed without error 00% 5485 -
#19 Short offline Completed without error 00% 5317 -
#20 Short offline Completed without error 00% 5149 -
#21 Short offline Completed without error 00% 5077 -
Note: selective self-test log revision number (0) not 1 implies that no selective self-test has ever been run
SMART Selective self-test log data structure revision number 0
Note: revision number not 1 implies that no selective self-test has ever been run
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Completed [00% left] (0-65535)
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
