Okay so here is my setup, I have had it since last year August, and everything was working fine until yesterday.
HP DL380p Gen8
CPU: 2 x Intel(R) Xeon(R) CPU E5-2690 0 @ 2.90GHz
RAM: 64 GB
HBA: 2 x HP H220 - IT Mode v20
Disks: 16 x SAS 10K Seagate ST900MM0006 (900GB) RAIDZ2
NIC: Mellanox ConnectX2 10gbe
Pool:
8x Mirrors
I had constant 1GB/s Read and Write speed. When copying large files.
There was an issue with the server and I had to clear the CMOS and bios settings, but also updated the Truenas Scale to Angle fish latest, then my read become about 300 MB/s, but for write I still can get 1GB/s.
I'm so confused as what could have caused it. There is no specific setting in the bios of the server that might have changed, I feel it could be the update!
Has anyone experienced similar issue before?
HP DL380p Gen8
CPU: 2 x Intel(R) Xeon(R) CPU E5-2690 0 @ 2.90GHz
RAM: 64 GB
HBA: 2 x HP H220 - IT Mode v20
Disks: 16 x SAS 10K Seagate ST900MM0006 (900GB) RAIDZ2
NIC: Mellanox ConnectX2 10gbe
Pool:
8x Mirrors
I had constant 1GB/s Read and Write speed. When copying large files.
There was an issue with the server and I had to clear the CMOS and bios settings, but also updated the Truenas Scale to Angle fish latest, then my read become about 300 MB/s, but for write I still can get 1GB/s.
I'm so confused as what could have caused it. There is no specific setting in the bios of the server that might have changed, I feel it could be the update!
Has anyone experienced similar issue before?