Hey!
I recently checked my storage and both my HDD Pools show Failed Smart Test. This one for example (consisting of 3 HDDs) has shows 63 Failed tests. However, when I open the "ViewSMART Test Results" (which is also not showing the results, I think it would be nice to get more data here), everything shows as "SUCCESS".
Below you can find the smartctl output. Is there a way to see what happened, or reset the message in the GUI?
I recently checked my storage and both my HDD Pools show Failed Smart Test. This one for example (consisting of 3 HDDs) has shows 63 Failed tests. However, when I open the "ViewSMART Test Results" (which is also not showing the results, I think it would be nice to get more data here), everything shows as "SUCCESS".
Below you can find the smartctl output. Is there a way to see what happened, or reset the message in the GUI?
Code:
root@Droptank[~]# smartctl -a /dev/sdb
smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.15.79+truenas] (local build)
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Seagate Exos X16
Device Model: ST14000NM001G-2KJ103
Serial Number: WL20438Y
LU WWN Device Id: 5 000c50 0d5f15f08
Firmware Version: SN03
User Capacity: 14,000,519,643,136 bytes [14.0 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 7200 rpm
Form Factor: 3.5 inches
Device is: In smartctl database [for details use: -P show]
ATA Version is: ACS-4 (minor revision not indicated)
SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Mon Jan 9 00:27:56 2023 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 567) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: (1261) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x70bd) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 084 064 044 Pre-fail Always - 236375192
3 Spin_Up_Time 0x0003 092 091 000 Pre-fail Always - 0
4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 57
5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0
7 Seek_Error_Rate 0x000f 078 060 045 Pre-fail Always - 66891444
9 Power_On_Hours 0x0032 095 095 000 Old_age Always - 4557
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 55
18 Head_Health 0x000b 100 100 050 Pre-fail Always - 0
187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
188 Command_Timeout 0x0032 100 100 000 Old_age Always - 0
190 Airflow_Temperature_Cel 0x0022 067 059 040 Old_age Always - 33 (Min/Max 32/39)
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 34
193 Load_Cycle_Count 0x0032 100 100 000 Old_age Always - 247
194 Temperature_Celsius 0x0022 033 041 000 Old_age Always - 33 (0 17 0 0 0)
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
200 Pressure_Limit 0x0023 100 100 001 Pre-fail Always - 0
240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 4548h+17m+31.567s
241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 10404161360
242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 21392443281
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 4533 -
# 2 Extended offline Completed without error 00% 4448 -
# 3 Short offline Completed without error 00% 4365 -
# 4 Short offline Completed without error 00% 4197 -
# 5 Short offline Completed without error 00% 4029 -
# 6 Short offline Completed without error 00% 3861 -
# 7 Short offline Completed without error 00% 3693 -
# 8 Short offline Completed without error 00% 3525 -
# 9 Short offline Completed without error 00% 3359 -
#10 Short offline Completed without error 00% 3278 -
#11 Short offline Completed without error 00% 3156 -
#12 Short offline Completed without error 00% 2987 -
#13 Short offline Completed without error 00% 2820 -
#14 Short offline Completed without error 00% 2652 -
#15 Short offline Completed without error 00% 2483 -
#16 Short offline Completed without error 00% 2331 -
#17 Short offline Completed without error 00% 2163 -
#18 Short offline Completed without error 00% 2041 -
#19 Short offline Completed without error 00% 1948 -
#20 Short offline Completed without error 00% 1877 -
#21 Short offline Completed without error 00% 1709 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
root@Droptank[~]# smartctl -a /dev/sdc
smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.15.79+truenas] (local build)
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Seagate Exos X16
Device Model: ST14000NM001G-2KJ103
Serial Number: WL203HLQ
LU WWN Device Id: 5 000c50 0d5efb042
Firmware Version: SN03
User Capacity: 14,000,519,643,136 bytes [14.0 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 7200 rpm
Form Factor: 3.5 inches
Device is: In smartctl database [for details use: -P show]
ATA Version is: ACS-4 (minor revision not indicated)
SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Mon Jan 9 00:28:05 2023 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 567) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: (1253) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x70bd) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 081 064 044 Pre-fail Always - 136959392
3 Spin_Up_Time 0x0003 091 091 000 Pre-fail Always - 0
4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 57
5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0
7 Seek_Error_Rate 0x000f 078 060 045 Pre-fail Always - 65803779
9 Power_On_Hours 0x0032 095 095 000 Old_age Always - 4557
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 55
18 Head_Health 0x000b 100 100 050 Pre-fail Always - 0
187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
188 Command_Timeout 0x0032 100 099 000 Old_age Always - 8590065666
190 Airflow_Temperature_Cel 0x0022 067 060 040 Old_age Always - 33 (Min/Max 31/39)
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 35
193 Load_Cycle_Count 0x0032 100 100 000 Old_age Always - 246
194 Temperature_Celsius 0x0022 033 040 000 Old_age Always - 33 (0 18 0 0 0)
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
200 Pressure_Limit 0x0023 100 100 001 Pre-fail Always - 0
240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 4548h+56m+32.243s
241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 10475455994
242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 21209477404
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 4533 -
# 2 Extended offline Completed without error 00% 4448 -
# 3 Short offline Completed without error 00% 4365 -
# 4 Short offline Completed without error 00% 4197 -
# 5 Short offline Completed without error 00% 4029 -
# 6 Short offline Completed without error 00% 3861 -
# 7 Short offline Completed without error 00% 3693 -
# 8 Short offline Completed without error 00% 3525 -
# 9 Short offline Completed without error 00% 3359 -
#10 Short offline Completed without error 00% 3277 -
#11 Short offline Completed without error 00% 3156 -
#12 Short offline Completed without error 00% 2987 -
#13 Short offline Completed without error 00% 2819 -
#14 Short offline Completed without error 00% 2651 -
#15 Short offline Completed without error 00% 2483 -
#16 Short offline Completed without error 00% 2331 -
#17 Short offline Completed without error 00% 2163 -
#18 Short offline Completed without error 00% 2041 -
#19 Short offline Completed without error 00% 1948 -
#20 Short offline Completed without error 00% 1877 -
#21 Short offline Completed without error 00% 1709 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
root@Droptank[~]# smartctl -a /dev/sde
smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.15.79+truenas] (local build)
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Seagate Exos X16
Device Model: ST14000NM001G-2KJ103
Serial Number: WL2044CG
LU WWN Device Id: 5 000c50 0d5f09692
Firmware Version: SN03
User Capacity: 14,000,519,643,136 bytes [14.0 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 7200 rpm
Form Factor: 3.5 inches
Device is: In smartctl database [for details use: -P show]
ATA Version is: ACS-4 (minor revision not indicated)
SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Mon Jan 9 00:28:11 2023 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 567) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: (1264) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x70bd) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 084 064 044 Pre-fail Always - 242215200
3 Spin_Up_Time 0x0003 091 091 000 Pre-fail Always - 0
4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 57
5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0
7 Seek_Error_Rate 0x000f 078 060 045 Pre-fail Always - 66015156
9 Power_On_Hours 0x0032 095 095 000 Old_age Always - 4557
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 55
18 Head_Health 0x000b 100 100 050 Pre-fail Always - 0
187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
188 Command_Timeout 0x0032 100 100 000 Old_age Always - 0
190 Airflow_Temperature_Cel 0x0022 067 059 040 Old_age Always - 33 (Min/Max 32/39)
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 34
193 Load_Cycle_Count 0x0032 100 100 000 Old_age Always - 246
194 Temperature_Celsius 0x0022 033 041 000 Old_age Always - 33 (0 17 0 0 0)
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
200 Pressure_Limit 0x0023 100 100 001 Pre-fail Always - 0
240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 4548h+28m+30.423s
241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 10743441640
242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 21050724117
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 4533 -
# 2 Extended offline Completed without error 00% 4448 -
# 3 Short offline Completed without error 00% 4365 -
# 4 Short offline Completed without error 00% 4197 -
# 5 Short offline Completed without error 00% 4029 -
# 6 Short offline Completed without error 00% 3861 -
# 7 Short offline Completed without error 00% 3693 -
# 8 Short offline Completed without error 00% 3525 -
# 9 Short offline Completed without error 00% 3359 -
#10 Short offline Completed without error 00% 3278 -
#11 Short offline Completed without error 00% 3156 -
#12 Short offline Completed without error 00% 2987 -
#13 Short offline Completed without error 00% 2820 -
#14 Short offline Completed without error 00% 2651 -
#15 Short offline Completed without error 00% 2483 -
#16 Short offline Completed without error 00% 2331 -
#17 Short offline Completed without error 00% 2163 -
#18 Short offline Completed without error 00% 2041 -
#19 Short offline Completed without error 00% 1948 -
#20 Short offline Completed without error 00% 1877 -
#21 Short offline Completed without error 00% 1709 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.