ses pass

[tyjgHoVeqqNeAJUr]

Hello,

Regarding the "security run output" below, can you please tell me it means?

Thank you,

Chris

Code:

myhost.mydomain.org changes in mounted filesystems:
12d11
< vol0/adam        /mnt/vol0/adam        zfs    ro,noatime,nfsv4acls    0 0
 
myhost.mydomain.org kernel log messages:
> ses0: pass0,da0: Element descriptor: 'Slot 04'
> ses0: pass0,da0: SAS Device Slot Element: 1 Phys at Slot 3
> ses0:  phy 0: SATA device
> ses0:  phy 0: parent 5003048000de723f addr 5003048000de720f
> ses0: pass1,da1: Element descriptor: 'Slot 05'
> ses0: pass1,da1: SAS Device Slot Element: 1 Phys at Slot 4
> ses0:  phy 0: SATA device
> ses0:  phy 0: parent 5003048000de723f addr 5003048000de7210
> ses0: pass2,da2: Element descriptor: 'Slot 06'
> ses0: pass2,da2: SAS Device Slot Element: 1 Phys at Slot 5
> ses0:  phy 0: SATA device
> ses0:  phy 0: parent 5003048000de723f addr 5003048000de7211
> ses0: pass3,da3: Element descriptor: 'Slot 10'
> ses0: pass3,da3: SAS Device Slot Element: 1 Phys at Slot 9
> ses0:  phy 0: SATA device
> ses0:  phy 0: parent 5003048000de723f addr 5003048000de7215
> ses0: pass4,da4: Element descriptor: 'Slot 11'
> ses0: pass4,da4: SAS Device Slot Element: 1 Phys at Slot 10
> ses0:  phy 0: SATA device
> ses0:  phy 0: parent 5003048000de723f addr 5003048000de7216
> ses0: pass5,da5: Element descriptor: 'Slot 12'
> ses0: pass5,da5: SAS Device Slot Element: 1 Phys at Slot 11
> ses0:  phy 0: SATA device
> ses0:  phy 0: parent 5003048000de723f addr 5003048000de7217
> ses0: pass6,da6: Element descriptor: 'Slot 16'
> ses0: pass6,da6: SAS Device Slot Element: 1 Phys at Slot 15
> ses0:  phy 0: SATA device
> ses0:  phy 0: parent 5003048000de723f addr 5003048000de721b
> ses0: pass7,da7: Element descriptor: 'Slot 17'
> ses0: pass7,da7: SAS Device Slot Element: 1 Phys at Slot 16
> ses0:  phy 0: SATA device
> ses0:  phy 0: parent 5003048000de723f addr 5003048000de721c
> ses0: pass8,da8: Element descriptor: 'Slot 18'
> ses0: pass8,da8: SAS Device Slot Element: 1 Phys at Slot 17
> ses0:  phy 0: SATA device
> ses0:  phy 0: parent 5003048000de723f addr 5003048000de721d
> ses0: pass9,da9: Element descriptor: 'Slot 23'
> ses0: pass9,da9: SAS Device Slot Element: 1 Phys at Slot 22
> ses0:  phy 0: SATA device
> ses0:  phy 0: parent 5003048000de723f addr 5003048000de7222
> ses0: pass10,da10: Element descriptor: 'Slot 24'
> ses0: pass10,da10: SAS Device Slot Element: 1 Phys at Slot 23
> ses0:  phy 0: SATA device
> ses0:  phy 0: parent 5003048000de723f addr 5003048000de7223
 
-- End of security output --

 

[Yatti420]

What version of FreeNAS? Looks like info about drives connected?

 

[panz]

Same log here, FreeNAS 9.2.1.3

 

[f64897011]

Could I ask which command was input to get these SES info? Thanks.