Robert Townsend
Dabbler
- Joined
- Dec 11, 2016
- Messages
- 20
I just set a bad drive at ad5 to offline, installed a replacement of same model, and 'replace' the bad drive. The system is currently resilvering for about 3 more hours. In the meantime the pool is 'degraded'. [BTW I had the drives spin down at 10 - probably a bad idea - now they are set always on]
Two issues, one probably easy:
ad7, and mirrored SSD is offline, I suspect I knocked a cable loose. I expect I'll have to reopen the box after the silvering is done
ad1, now is in FAILED state
Is it merely coincidence that ad1 is FAILED? Anything to do other than replace it? I saw one post about running a scrub might clear the issue.
Two issues, one probably easy:
ad7, and mirrored SSD is offline, I suspect I knocked a cable loose. I expect I'll have to reopen the box after the silvering is done
ad1, now is in FAILED state
Is it merely coincidence that ad1 is FAILED? Anything to do other than replace it? I saw one post about running a scrub might clear the issue.