Glorious1
Guru
- Joined
- Nov 23, 2014
- Messages
- 1,211
I noticed recently in
I can't access it with smartctl as da0 or da0p2, it reports it doesn't exist.
It shows in camcontrol devlist, but look how the labels are reversed!
What does this mean? Is something wrong with the disk? Or the HBA (LSI MegaRAID 9240-8i 8-port PCI-E 6Gb RAID Controller IBM M1015 46M0861)? I think the da# disks are on the HBA.
/var/log/messages
a strange series of entries about my disk da0. It looks like there are some errors maybe, then the pool is taken apart and rebuilt. Code:
Nov 6 19:42:28 Tabernacle (da0:mps0:0:0:0): READ(10). CDB: 28 00 09 73 ac 18 00 00 58 00 length 45056 SMID 390 Aborting command 0xfffffe0001254fe0 Nov 6 19:42:28 Tabernacle mps0: Sending reset from mpssas_send_abort for target ID 0 Nov 6 19:42:28 Tabernacle (da1:mps0:0:1:0): READ(10). CDB: 28 00 09 73 ac 18 00 00 58 00 length 45056 SMID 272 Aborting command 0xfffffe000124b500 Nov 6 19:42:28 Tabernacle mps0: Sending reset from mpssas_send_abort for target ID 1 Nov 6 19:42:28 Tabernacle (da2:mps0:0:3:0): READ(10). CDB: 28 00 09 73 ac 18 00 00 50 00 length 40960 SMID 877 Aborting command 0xfffffe000127cf10 Nov 6 19:42:28 Tabernacle mps0: Sending reset from mpssas_send_abort for target ID 3 Nov 6 19:42:29 Tabernacle mps0: mpssas_action_scsiio: Freezing devq for target ID 0 Nov 6 19:42:29 Tabernacle (da0:mps0:0:0:0): READ(16). CDB: 88 00 00 00 00 01 4e f5 d6 e8 00 00 00 08 00 00 Nov 6 19:42:29 Tabernacle (da0:mps0:0:0:0): CAM status: CAM subsystem is busy Nov 6 19:42:29 Tabernacle (da0:mps0:0:0:0): Retrying command Nov 6 19:42:29 Tabernacle (da3:mps0:0:4:0): READ(10). CDB: 28 00 09 73 ac c8 00 00 58 00 length 45056 SMID 169 Aborting command 0xfffffe0001242dd0 Nov 6 19:42:29 Tabernacle mps0: Sending reset from mpssas_send_abort for target ID 4 Nov 6 19:42:30 Tabernacle mps0: mpssas_action_scsiio: Freezing devq for target ID 0 Nov 6 19:42:30 Tabernacle (da0:mps0:0:0:0): READ(16). CDB: 88 00 00 00 00 01 4e f5 d6 e8 00 00 00 08 00 00 Nov 6 19:42:30 Tabernacle (da0:mps0:0:0:0): CAM status: CAM subsystem is busy Nov 6 19:42:30 Tabernacle (da0:mps0:0:0:0): Retrying command Nov 6 19:42:30 Tabernacle mps0: mpssas_action_scsiio: Freezing devq for target ID 0 Nov 6 19:42:30 Tabernacle (da0:mps0:0:0:0): READ(16). CDB: 88 00 00 00 00 01 4e f5 d6 e8 00 00 00 08 00 00 Nov 6 19:42:30 Tabernacle (da0:mps0:0:0:0): CAM status: CAM subsystem is busy Nov 6 19:42:30 Tabernacle (da0:mps0:0:0:0): Retrying command Nov 6 19:42:31 Tabernacle mps0: mpssas_action_scsiio: Freezing devq for target ID 0 Nov 6 19:42:31 Tabernacle (da0:mps0:0:0:0): READ(16). CDB: 88 00 00 00 00 01 4e f5 d6 e8 00 00 00 08 00 00 Nov 6 19:42:31 Tabernacle (da0:mps0:0:0:0): CAM status: CAM subsystem is busy Nov 6 19:42:31 Tabernacle (da0:mps0:0:0:0): Retrying command Nov 6 19:42:31 Tabernacle mps0: mpssas_action_scsiio: Freezing devq for target ID 0 Nov 6 19:42:31 Tabernacle (da0:mps0:0:0:0): READ(16). CDB: 88 00 00 00 00 01 4e f5 d6 e8 00 00 00 08 00 00 Nov 6 19:42:31 Tabernacle (da0:mps0:0:0:0): CAM status: CAM subsystem is busy Nov 6 19:42:31 Tabernacle (da0:mps0:0:0:0): Error 5, Retries exhausted Nov 6 19:42:31 Tabernacle mps0: mpssas_action_scsiio: Freezing devq for target ID 0 Nov 6 19:42:31 Tabernacle (da0:mps0:0:0:0): READ(10). CDB: 28 00 00 40 02 90 00 00 10 00 Nov 6 19:42:31 Tabernacle (da0:mps0:0:0:0): CAM status: CAM subsystem is busy Nov 6 19:42:31 Tabernacle (da0:mps0:0:0:0): Retrying command Nov 6 19:42:32 Tabernacle mps0: mpssas_action_scsiio: Freezing devq for target ID 0 Nov 6 19:42:32 Tabernacle (da0:mps0:0:0:0): READ(10). CDB: 28 00 00 40 02 90 00 00 10 00 Nov 6 19:42:32 Tabernacle (da0:mps0:0:0:0): CAM status: CAM subsystem is busy Nov 6 19:42:32 Tabernacle (da0:mps0:0:0:0): Retrying command Nov 6 19:42:32 Tabernacle mps0: mpssas_action_scsiio: Freezing devq for target ID 0 Nov 6 19:42:32 Tabernacle (da0:mps0:0:0:0): READ(10). CDB: 28 00 00 40 02 90 00 00 10 00 Nov 6 19:42:32 Tabernacle (da0:mps0:0:0:0): CAM status: CAM subsystem is busy Nov 6 19:42:32 Tabernacle (da0:mps0:0:0:0): Retrying command Nov 6 19:42:33 Tabernacle mps0: mpssas_action_scsiio: Freezing devq for target ID 0 Nov 6 19:42:33 Tabernacle (da0:mps0:0:0:0): READ(10). CDB: 28 00 00 40 02 90 00 00 10 00 Nov 6 19:42:33 Tabernacle (da0:mps0:0:0:0): CAM status: CAM subsystem is busy Nov 6 19:42:33 Tabernacle (da0:mps0:0:0:0): Retrying command Nov 6 19:42:35 Tabernacle mps0: mpssas_action_scsiio: Freezing devq for target ID 0 Nov 6 19:42:35 Tabernacle (xpt0:mps0:0:3:0): SMID 15 task mgmt 0xfffffe00012363b0 timed out Nov 6 19:42:35 Tabernacle mps0: Reinitializing controller, Nov 6 19:42:35 Tabernacle (da0:mps0:0:0:0): READ(10). CDB: 28 00 00 40 02 90 00 00 10 00 Nov 6 19:42:35 Tabernacle (da0:mps0:0:0:0): CAM status: CAM subsystem is busy Nov 6 19:42:35 Tabernacle (da0:mps0:0:0:0): Error 5, Retries exhausted Nov 6 19:42:35 Tabernacle mps0: Unfreezing devq for target ID 0 Nov 6 19:42:35 Tabernacle mps0: Unfreezing devq for target ID 1 Nov 6 19:42:35 Tabernacle mps0: Unfreezing devq for target ID 3 Nov 6 19:42:35 Tabernacle mps0: Unfreezing devq for target ID 4 Nov 6 19:42:35 Tabernacle mps0: Firmware: 20.00.07.00, Driver: 21.02.00.00-fbsd Nov 6 19:42:35 Tabernacle mps0: IOCCapabilities: 1285c<ScsiTaskFull,DiagTrace,SnapBuf,EEDP,TransRetry,EventReplay,HostDisc> Nov 6 19:42:35 Tabernacle mps0: mps_reinit finished sc 0xfffffe0001081000 post 4 free 3 Nov 6 19:42:35 Tabernacle (da0:mps0:0:0:0): Invalidating pack Nov 6 19:42:35 Tabernacle da0 at mps0 bus 0 scbus0 target 0 lun 0 Nov 6 19:42:35 Tabernacle da0: <ATA WDC WD30EZRX-00S 0A80> s/n WD-WCC4E0749572 detached Nov 6 19:42:36 Tabernacle mps0: SAS Address for SATA device = 495c3f45dcbcb26f Nov 6 19:42:36 Tabernacle mps0: SAS Address from SATA device = 495c3f45dcbcb26f Nov 6 19:42:36 Tabernacle mps0: SAS Address for SATA device = d2696859d9cecf80 Nov 6 19:42:36 Tabernacle mps0: SAS Address from SATA device = d2696859d9cecf80 Nov 6 19:42:37 Tabernacle mps0: SAS Address for SATA device = 495c3e47d6beb471 Nov 6 19:42:37 Tabernacle mps0: SAS Address from SATA device = 495c3e47d6beb471 Nov 6 19:42:37 Tabernacle mps0: SAS Address for SATA device = 495c3e45d8baae6f Nov 6 19:42:37 Tabernacle mps0: SAS Address from SATA device = 495c3e45d8baae6f Nov 6 19:42:43 Tabernacle GEOM_MIRROR: Device swap1: provider da0p1 disconnected. Nov 6 19:42:43 Tabernacle ZFS: vdev state changed, pool_guid=4269423227442216231 vdev_guid=134269995022058455 Nov 6 19:42:43 Tabernacle ZFS: vdev is removed, pool_guid=4269423227442216231 vdev_guid=134269995022058455 Nov 6 19:42:43 Tabernacle (da0:mps0:0:0:0): Periph destroyed Nov 6 19:42:43 Tabernacle da0 at mps0 bus 0 scbus0 target 0 lun 0 Nov 6 19:42:43 Tabernacle da0: <ATA WDC WD30EZRX-00S 0A80> Fixed Direct Access SPC-4 SCSI device Nov 6 19:42:43 Tabernacle da0: Serial Number WD-WCC4E0749572 Nov 6 19:42:43 Tabernacle da0: 600.000MB/s transfers Nov 6 19:42:43 Tabernacle da0: Command Queueing enabled Nov 6 19:42:43 Tabernacle da0: 2861588MB (5860533168 512 byte sectors) Nov 6 19:42:43 Tabernacle da0: quirks=0x8<4K> Nov 6 19:42:43 Tabernacle ZFS: vdev state changed, pool_guid=4269423227442216231 vdev_guid=134269995022058455 Nov 6 19:42:53 Tabernacle GEOM_ELI: Device mirror/swap1.eli destroyed. Nov 6 19:42:53 Tabernacle GEOM_MIRROR: Device swap1: provider destroyed. Nov 6 19:42:53 Tabernacle GEOM_MIRROR: Device swap1 destroyed. Nov 6 19:42:54 Tabernacle GEOM_MIRROR: Device mirror/swap1 launched (2/2). Nov 6 19:42:55 Tabernacle GEOM_ELI: Device mirror/swap1.eli created. Nov 6 19:42:55 Tabernacle GEOM_ELI: Encryption: AES-XTS 128 Nov 6 19:42:55 Tabernacle GEOM_ELI: Crypto: hardware
zpool status
reports all is fine, but the disk is labeled differently than the others:Code:
NAME STATE READ WRITE CKSUM Ark ONLINE 0 0 0 raidz1-0 ONLINE 0 0 0 da0p2 ONLINE 0 0 0 gptid/ecf00bc5-d70b-11e7-b968-0cc47a319aec ONLINE 0 0 0 gptid/b4f85047-89d1-11e4-8e67-0cc47a319aec ONLINE 0 0 0 gptid/b5ec52cc-89d1-11e4-8e67-0cc47a319aec ONLINE 0 0 0 errors: No known data errors
I can't access it with smartctl as da0 or da0p2, it reports it doesn't exist.
It shows in camcontrol devlist, but look how the labels are reversed!
Code:
Tabernacle:/var/log$ sudo camcontrol devlist Password: <ATA WDC WD30EZRX-00S 0A80> at scbus0 target 0 lun 0 (da0,pass0) <ATA WDC WD30EZRX-00S 0A80> at scbus0 target 1 lun 0 (pass1,da1) <ATA WDC WD30EZRX-00S 0A80> at scbus0 target 3 lun 0 (pass2,da2) <ATA WDC WD30EFRX-68E 0A82> at scbus0 target 4 lun 0 (pass3,da3) <WDC WD30EFRX-68EUZN0 82.00A82> at scbus2 target 0 lun 0 (pass4,ada0) <TS32GSSD370S P1225CH1> at scbus4 target 0 lun 0 (pass5,ada1) <WDC WD40EFRX-68N32N0 82.00A82> at scbus5 target 0 lun 0 (pass6,ada2) <WDC WD30EFRX-68EUZN0 82.00A82> at scbus6 target 0 lun 0 (pass7,ada3)
What does this mean? Is something wrong with the disk? Or the HBA (LSI MegaRAID 9240-8i 8-port PCI-E 6Gb RAID Controller IBM M1015 46M0861)? I think the da# disks are on the HBA.