Running Scale on new custom hardware with 10Gbe adapter.
SMART enabled on all drives, all without errors.
I have randomly issues with transfers over SMB. Transfers suddenly run on 0% speed. Then after a few seconds it continues copying.
Very weird.
Only SSH and SMB services active.
Hardware:
i5-8600 @3.1Ghz
64GB memory
4x 8TB in 1 pool
2x 5TB in 1 pool
2x 2TB in 1 pool (system pool)
2x 1TB in 1 pool
OS on NVMe drive onboard
H200 in IT mode controller
Intel 540 10Gbe fiber
Onboard 1Gbe ethernet
Version:
TrueNAS-SCALE-22.02.0
Maybe this log entry has something to do with this issue?
syslog shows every x seconds:
FileNotFoundError: [Errno 2] No such file or directory: '/proc/net/rpc/nfsd'
Feb 25 15:24:35 scale collectd[9365]: Traceback (most recent call last):
File "/usr/local/lib/collectd_pyplugins/nfsstat.py", line 23, in read
with open("/proc/net/rpc/nfsd", "r") as f:
Anyone know what above means, maybe this causes the issue?
There is no nfsd at this fil location...
Thanks in advance!
SMART enabled on all drives, all without errors.
I have randomly issues with transfers over SMB. Transfers suddenly run on 0% speed. Then after a few seconds it continues copying.
Very weird.
Only SSH and SMB services active.
Hardware:
i5-8600 @3.1Ghz
64GB memory
4x 8TB in 1 pool
2x 5TB in 1 pool
2x 2TB in 1 pool (system pool)
2x 1TB in 1 pool
OS on NVMe drive onboard
H200 in IT mode controller
Intel 540 10Gbe fiber
Onboard 1Gbe ethernet
Version:
TrueNAS-SCALE-22.02.0
Maybe this log entry has something to do with this issue?
syslog shows every x seconds:
FileNotFoundError: [Errno 2] No such file or directory: '/proc/net/rpc/nfsd'
Feb 25 15:24:35 scale collectd[9365]: Traceback (most recent call last):
File "/usr/local/lib/collectd_pyplugins/nfsstat.py", line 23, in read
with open("/proc/net/rpc/nfsd", "r") as f:
Anyone know what above means, maybe this causes the issue?
There is no nfsd at this fil location...
Thanks in advance!