Replacing Drives to Grow a ZFS Pool

[obsodien]

I have just recently reaplced my 4 1TB hardrives with 4 3TB WD Reds.... Atoexpand wasenabled before starting the process....
I took each of the drives OFFLINE replaced with 3TB hard drive, added the new drive to the pool and waited for the resilverd to complete before continuing onto the next drive.

Do I need to go through section 8.1.12. Enabling ZFS Pool Expansion?

running on version FreeNAS-9.3-STABLE-201501301837
4 3TB Hardrives (upgraded from 4 1TB)
12GB Ram

[root@10] ~# zpool status volume1
pool: volume1
state: ONLINE
scan: resilvered 773G in 3h35m with 0 errors on Tue Feb 3 17:22:03 2015
config:

NAME STATE READ WRITE CKSUM
volume1 ONLINE 0 0 0
raidz1-0 ONLINE 0 0 0
gptid/f69a03ee-ab57-11e4-b7f6-74d435a5421d ONLINE 0 0 0
gptid/0f505ef3-ab9c-11e4-b7f6-74d435a5421d ONLINE 0 0 0
gptid/030b2f32-ab7b-11e4-b7f6-74d435a5421d ONLINE 0 0 0
gptid/05468378-abd5-11e4-b7f6-74d435a5421d ONLINE 0 0 0

errors: No known data errors

[root@10] ~# zpool list volume1
NAME SIZE ALLOC FREE EXPANDSZ FRAG CAP DEDUP HEALTH ALTROOT
volume1 10.9T 3.16T 7.74T - 2% 29% 1.00x ONLINE /mnt

 

[obsodien]

NEVERMIND..... Patience is a virtue I was forgetting about.... Egg on Face!!!!!