Hello,
we are using FreeNas 11.2 U4.1 and trying to replace a defective disk. I did all the steps in the manual but i cannot "replace" the disk.
I did the following:
logon to FreeNas GUI and set the defective disk from unavailable to offline. After that i shutted down the Server and removed the defective disk and inserted the new one.
I powered up the server again and the "new" disk is shown as /dev/gptid/02211a13-7967-11e9-a5c4-0cc47a57eec8 with status offline.
When i now click on the 3 dots and choose replace i cannot choose a member disk as replacement.
In BIOS the new disk is visible and when i go to the shell and type camcontrol devlist the disks are listed like "serialnumber" at scbus3 target 66 lun 0 (pass21) but without da number behind.
Any help is much appreciated.
we are using FreeNas 11.2 U4.1 and trying to replace a defective disk. I did all the steps in the manual but i cannot "replace" the disk.
I did the following:
logon to FreeNas GUI and set the defective disk from unavailable to offline. After that i shutted down the Server and removed the defective disk and inserted the new one.
I powered up the server again and the "new" disk is shown as /dev/gptid/02211a13-7967-11e9-a5c4-0cc47a57eec8 with status offline.
When i now click on the 3 dots and choose replace i cannot choose a member disk as replacement.
In BIOS the new disk is visible and when i go to the shell and type camcontrol devlist the disks are listed like "serialnumber" at scbus3 target 66 lun 0 (pass21) but without da number behind.
Any help is much appreciated.
