Ismael Duarte
Contributor
- Joined
- Jun 13, 2011
- Messages
- 154
Some update.
Not very hopefull to get data back :(
Do you think that I have any chance?
I've also tried zpool import -nfF 10594485672682089254
But had a FATAL TRAP 12, as usual.
dmesg
glabel status
camcontrol devlist -v
smartctl -q noserial -a /dev/ada2 - Think problem should be here
smartctl -q noserial -a /dev/ada3 - And here
Not very hopefull to get data back :(
Do you think that I have any chance?
I've also tried zpool import -nfF 10594485672682089254
But had a FATAL TRAP 12, as usual.
dmesg
Code:
[root@freenas] ~# dmesg Copyright (c) 1992-2012 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 8.3-RELEASE-p6 #0 r248141M: Sun Mar 10 23:42:41 PDT 2013 root@build.ixsystems.com:/home/jpaetzel/8.3.1-RELEASE/os-base/i386/i386/tank/home/jpaetzel/8.3.1-RELEASE/FreeBSD/src/sys/FREENAS.i386 i386 Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) Pentium(R) 4 CPU 3.20GHz (3198.48-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0xf34 Family = f Model = 3 Stepping = 4 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0x441d<SSE3,DTES64,MON,DS_CPL,CNXT-ID,xTPR> TSC: P-state invariant real memory = 3221225472 (3072 MB) avail memory = 3139133440 (2993 MB) ACPI APIC Table: <A M I OEMAPIC > FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs FreeBSD/SMP: 1 package(s) x 1 core(s) x 2 HTT threads cpu0 (BSP): APIC ID: 0 cpu1 (AP/HT): APIC ID: 1 WARNING: VIMAGE (virtualized network stack) is a highly experimental feature. ioapic0 <Version 2.0> irqs 0-23 on motherboard kbd1 at kbdmux0 hpt27xx: RocketRAID 27xx controller driver v1.0 (Mar 10 2013 23:42:32) cryptosoft0: <software crypto> on motherboard aesni0: No AESNI support. acpi0: <A M I OEMRSDT> on motherboard acpi0: [ITHREAD] acpi0: Power Button (fixed) acpi0: reservation of 0, a0000 (3) failed acpi0: reservation of 100000, bfef0000 (3) failed Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 cpu0: <ACPI CPU> on acpi0 cpu1: <ACPI CPU> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 agp0: <Intel 82865 host to AGP bridge> on hostb0 pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 pci1: <ACPI PCI bus> on pcib1 vgapci0: <VGA-compatible display> mem 0xfd000000-0xfdffffff,0xe8000000-0xefffffff irq 16 at device 0.0 on pci1 uhci0: <Intel 82801EB (ICH5) USB controller USB-A> port 0xeec0-0xeedf irq 16 at device 29.0 on pci0 uhci0: [ITHREAD] usbus0: <Intel 82801EB (ICH5) USB controller USB-A> on uhci0 uhci1: <Intel 82801EB (ICH5) USB controller USB-B> port 0xef00-0xef1f irq 19 at device 29.1 on pci0 uhci1: [ITHREAD] usbus1: <Intel 82801EB (ICH5) USB controller USB-B> on uhci1 uhci2: <Intel 82801EB (ICH5) USB controller USB-C> port 0xef20-0xef3f irq 18 at device 29.2 on pci0 uhci2: [ITHREAD] usbus2: <Intel 82801EB (ICH5) USB controller USB-C> on uhci2 uhci3: <Intel 82801EB (ICH5) USB controller USB-D> port 0xef40-0xef5f irq 16 at device 29.3 on pci0 uhci3: [ITHREAD] usbus3: <Intel 82801EB (ICH5) USB controller USB-D> on uhci3 ehci0: <Intel 82801EB/R (ICH5) USB 2.0 controller> mem 0xfebff800-0xfebffbff irq 23 at device 29.7 on pci0 ehci0: [ITHREAD] usbus4: EHCI version 1.0 usbus4: <Intel 82801EB/R (ICH5) USB 2.0 controller> on ehci0 pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pci2: <ACPI PCI bus> on pcib2 atapci0: <Promise PDC20378 SATA150 controller> port 0xdf00-0xdf3f,0xdfa0-0xdfaf,0xdc00-0xdc7f mem 0xfeafe000-0xfeafefff,0xfeac0000-0xfeadffff irq 23 at device 4.0 on pci2 atapci0: [ITHREAD] atapci0: [ITHREAD] ata2: <ATA channel> at channel 0 on atapci0 ata2: [ITHREAD] ata3: <ATA channel> at channel 1 on atapci0 ata3: [ITHREAD] ata4: <ATA channel> at channel 2 on atapci0 ata4: [ITHREAD] skc0: <Marvell Gigabit Ethernet> port 0xd800-0xd8ff mem 0xfeaf8000-0xfeafbfff irq 22 at device 5.0 on pci2 skc0: Marvell Yukon Lite Gigabit Ethernet rev. (0x9) sk0: <Marvell Semiconductor, Inc. Yukon> on skc0 sk0: Ethernet address: 00:13:d4:19:0f:38 miibus0: <MII bus> on sk0 e1000phy0: <Marvell 88E1011 Gigabit PHY> PHY 0 on miibus0 e1000phy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto skc0: [ITHREAD] isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci1: <Intel ICH5 UDMA100 controller> port 0xefe0-0xefe7,0xefac-0xefaf,0xefa0-0xefa7,0xefa8-0xefab,0xef90-0xef9f irq 18 at device 31.1 on pci0 atapci1: [ITHREAD] ata5: <ATA channel> at channel 0 on atapci1 ata5: [ITHREAD] ata6: <ATA channel> at channel 1 on atapci1 ata6: [ITHREAD] atapci2: <Intel ICH5 SATA150 controller> port 0xef88-0xef8f,0xef84-0xef87,0xef68-0xef6f,0xef80-0xef83,0xeeb0-0xeebf irq 18 at device 31.2 on pci0 atapci2: [ITHREAD] ata7: <ATA channel> at channel 0 on atapci2 ata7: [ITHREAD] ata8: <ATA channel> at channel 1 on atapci2 ata8: [ITHREAD] pci0: <serial bus, SMBus> at device 31.3 (no driver attached) acpi_button0: <Power Button> on acpi0 atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] atkbd0: [ITHREAD] fdc0: <floppy drive controller (FDE)> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0 fdc0: [FILTER] pmtimer0 on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 ata0: <ATA channel> at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0 ata0: [ITHREAD] ata1: <ATA channel> at port 0x170-0x177,0x376 irq 15 on isa0 ata1: [ITHREAD] ppc0: parallel port not found. p4tcc0: <CPU Frequency Thermal Control> on cpu0 p4tcc1: <CPU Frequency Thermal Control> on cpu1 fuse4bsd: version 0.3.9-pre1, FUSE ABI 7.8 Timecounters tick every 1.000 msec hpt27xx: no controller detected. GEOM_RAID5: Module loaded, version 1.1.20110927.40 (rev 00ce00e5abb4) usbus0: 12Mbps Full Speed USB v1.0 usbus1: 12Mbps Full Speed USB v1.0 usbus2: 12Mbps Full Speed USB v1.0 usbus3: 12Mbps Full Speed USB v1.0 usbus4: 480Mbps High Speed USB v2.0 ugen0.1: <Intel> at usbus0 uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 ugen1.1: <Intel> at usbus1 uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 ugen2.1: <Intel> at usbus2 uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2 ugen3.1: <Intel> at usbus3 uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3 ugen4.1: <Intel> at usbus4 uhub4: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus4 uhub0: 2 ports with 2 removable, self powered uhub1: 2 ports with 2 removable, self powered uhub2: 2 ports with 2 removable, self powered uhub3: 2 ports with 2 removable, self powered uhub4: 8 ports with 8 removable, self powered ugen4.2: <JetFlash> at usbus4 umass0: <JetFlash Mass Storage Device, class 0/0, rev 2.00/11.00, addr 2> on usbus4 ada0 at ata2 bus 0 scbus0 target 0 lun 0 ada0: <WDC WD5000AAKX-001CA0 15.01H15> ATA-8 SATA 3.x device ada0: 150.000MB/s transfers (SATA 1.x, UDMA5, PIO 8192bytes) ada0: 476940MB (976773168 512 byte sectors: 16H 63S/T 16383C) ada1 at ata3 bus 0 scbus1 target 0 lun 0 ada1: <WDC WD20EARX-00PASB0 51.0AB51> ATA-8 SATA 3.x device ada1: 150.000MB/s transfers (SATA 1.x, UDMA5, PIO 8192bytes) ada1: 1907729MB (3907029168 512 byte sectors: 16H 63S/T 16383C) ada2 at ata7 bus 0 scbus5 target 0 lun 0 ada2: <ST31000528AS CC44> ATA-8 SATA 2.x device ada2: 150.000MB/s transfers (SATA 1.x, UDMA5, PIO 8192bytes) ada2: 953869MB (1953525168 512 byte sectors: 16H 63S/T 16383C) ada3 at ata8 bus 0 scbus6 target 0 lun 0 ada3: <Hitachi HDP725050GLA360 GM4OA5CA> ATA-8 SATA 2.x device ada3: 150.000MB/s transfers (SATA 1.x, UDMA5, PIO 8192bytes) ada3: 476940MB (976773168 512 byte sectors: 16H 63S/T 16383C) da0 at umass-sim0 bus 0 scbus9 target 0 lun 0 da0: <JetFlash Transcend 2GB 1100> Removable Direct Access SCSI-0 device da0: 40.000MB/s transfers da0: 1920MB (3932160 512 byte sectors: 255H 63S/T 244C) SMP: AP CPU #1 Launched! GEOM: da0s1: geometry does not match label (16h,63s != 255h,63s). Trying to mount root from ufs:/dev/ufs/FreeNASs1a GEOM_ELI: Device ada0p1.eli created. GEOM_ELI: Encryption: AES-XTS 256 GEOM_ELI: Crypto: software GEOM_ELI: Device ada1p1.eli created. GEOM_ELI: Encryption: AES-XTS 256 GEOM_ELI: Crypto: software GEOM_ELI: Device ada2p1.eli created. GEOM_ELI: Encryption: AES-XTS 256 GEOM_ELI: Crypto: software GEOM_ELI: Device ada3p1.eli created. GEOM_ELI: Encryption: AES-XTS 256 GEOM_ELI: Crypto: software ZFS filesystem version 5 ZFS storage pool version 28 smartctl -t /dev/ada0p1
glabel status
Code:
[root@freenas] ~# glabel status Name Status Components gptid/825ab845-6235-11e2-824e-0013d4190f38 N/A ada0p2 ufsid/515203e3d9189982 N/A ada1p2 ufs/DATA N/A ada1p2 gptid/19e832e2-9653-11e2-b7df-0013d4190f38 N/A ada1p2 gptid/b508afe4-2175-11e1-9bde-0013d4190f38 N/A ada2p2 gptid/0e99edd8-21e6-11e1-8c42-0013d4190f38 N/A ada3p2 ufs/FreeNASs3 N/A da0s3 ufs/FreeNASs4 N/A da0s4 ufs/FreeNASs1a N/A da0s1a
camcontrol devlist -v
Code:
[root@freenas] ~# camcontrol devlist -v scbus0 on ata2 bus 0: <WDC WD5000AAKX-001CA0 15.01H15> at scbus0 target 0 lun 0 (pass0,ada0) <> at scbus0 target -1 lun -1 () scbus1 on ata3 bus 0: <WDC WD20EARX-00PASB0 51.0AB51> at scbus1 target 0 lun 0 (pass1,ada1) <> at scbus1 target -1 lun -1 () scbus2 on ata4 bus 0: <> at scbus2 target -1 lun -1 () scbus3 on ata5 bus 0: <> at scbus3 target -1 lun -1 () scbus4 on ata6 bus 0: <> at scbus4 target -1 lun -1 () scbus5 on ata7 bus 0: <ST31000528AS CC44> at scbus5 target 0 lun 0 (pass2,ada2) <> at scbus5 target -1 lun -1 () scbus6 on ata8 bus 0: <Hitachi HDP725050GLA360 GM4OA5CA> at scbus6 target 0 lun 0 (pass3,ada3) <> at scbus6 target -1 lun -1 () scbus7 on ata0 bus 0: <> at scbus7 target -1 lun -1 () scbus8 on ata1 bus 0: <> at scbus8 target -1 lun -1 () scbus9 on umass-sim0 bus 0: <JetFlash Transcend 2GB 1100> at scbus9 target 0 lun 0 (pass4,da0) scbus-1 on xpt0 bus 0: <> at scbus-1 target -1 lun -1 (xpt0)
smartctl -q noserial -a /dev/ada2 - Think problem should be here
Code:
[root@freenas] ~# smartctl -q noserial -a /dev/ada2 smartctl 5.43 2012-06-30 r3573 [FreeBSD 8.3-RELEASE-p6 i386] (local build) Copyright (C) 2002-12 by Bruce Allen, http://smartmontools.sourceforge.net === START OF INFORMATION SECTION === Model Family: Seagate Barracuda 7200.12 Device Model: ST31000528AS Firmware Version: CC44 User Capacity: 1,000,204,886,016 bytes [1.00 TB] Sector Size: 512 bytes logical/physical Device is: In smartctl database [for details use: -P show] ATA Version is: 8 ATA Standard is: ATA-8-ACS revision 4 Local Time is: Sun Mar 31 22:08:09 2013 WEST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 600) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 190) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x103f) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 114 099 006 Pre-fail Always - 71236784 3 Spin_Up_Time 0x0003 096 094 000 Pre-fail Always - 0 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 696 5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0 7 Seek_Error_Rate 0x000f 065 060 030 Pre-fail Always - 12895614854 9 Power_On_Hours 0x0032 094 094 000 Old_age Always - 6088 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 696 183 Runtime_Bad_Block 0x0000 100 100 000 Old_age Offline - 0 184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0 188 Command_Timeout 0x0032 100 098 000 Old_age Always - 12885098504 189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0 190 Airflow_Temperature_Cel 0x0022 058 047 045 Old_age Always - 42 (Min/Max 39/42) 194 Temperature_Celsius 0x0022 042 053 000 Old_age Always - 42 (0 13 0 0 0) 195 Hardware_ECC_Recovered 0x001a 039 025 000 Old_age Always - 71236784 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x003e 200 162 000 Old_age Always - 13443 240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 126388002626762 241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 3012032638 242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 1937505612 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 6088 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.
smartctl -q noserial -a /dev/ada3 - And here
Code:
[root@freenas] ~# smartctl -q noserial -a /dev/ada3 smartctl 5.43 2012-06-30 r3573 [FreeBSD 8.3-RELEASE-p6 i386] (local build) Copyright (C) 2002-12 by Bruce Allen, http://smartmontools.sourceforge.net === START OF INFORMATION SECTION === Model Family: Hitachi Deskstar P7K500 Device Model: Hitachi HDP725050GLA360 Firmware Version: GM4OA5CA User Capacity: 500,107,862,016 bytes [500 GB] Sector Size: 512 bytes logical/physical Device is: In smartctl database [for details use: -P show] ATA Version is: 8 ATA Standard is: ATA-8-ACS revision 4 Local Time is: Sun Mar 31 22:09:17 2013 WEST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x80) Offline data collection activity was never started. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 7890) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 131) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000b 100 100 016 Pre-fail Always - 0 2 Throughput_Performance 0x0005 133 133 054 Pre-fail Offline - 139 3 Spin_Up_Time 0x0007 122 122 024 Pre-fail Always - 311 (Average 316) 4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 2109 5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 0 7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0 8 Seek_Time_Performance 0x0005 131 131 020 Pre-fail Offline - 29 9 Power_On_Hours 0x0012 099 099 000 Old_age Always - 11991 10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 827 192 Power-Off_Retract_Count 0x0032 088 088 000 Old_age Always - 14738 193 Load_Cycle_Count 0x0012 088 088 000 Old_age Always - 14738 194 Temperature_Celsius 0x0002 130 130 000 Old_age Always - 46 (Min/Max 14/56) 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0 197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 2751 SMART Error Log Version: 1 ATA Error Count: 2634 (device log contains only the most recent five errors) CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 2634 occurred at disk power-on lifetime: 2106 hours (87 days + 18 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 00 87 27 76 e0 Error: ICRC, ABRT at LBA = 0x00762787 = 7743367 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 0b 7d 27 76 e0 00 00:24:14.000 READ DMA c8 00 0b fc 29 76 e0 00 00:24:12.800 READ DMA c8 00 0b 76 28 76 e0 00 00:24:11.600 READ DMA c8 00 0b 76 28 76 e0 00 00:24:11.500 READ DMA c8 00 0b ff 27 76 e0 00 00:24:10.100 READ DMA Error 2633 occurred at disk power-on lifetime: 2106 hours (87 days + 18 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 00 ff 27 76 e0 Error: ICRC, ABRT at LBA = 0x007627ff = 7743487 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 80 80 27 76 e0 00 00:24:03.500 READ DMA c8 00 80 80 27 76 e0 00 00:24:03.500 READ DMA c8 00 80 80 27 76 e0 00 00:24:03.500 READ DMA c8 00 80 80 2a 76 e0 00 00:24:02.200 READ DMA c8 00 0b f9 28 76 e0 00 00:24:01.300 READ DMA Error 2632 occurred at disk power-on lifetime: 2106 hours (87 days + 18 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 30 d0 27 76 e0 Error: ICRC, ABRT 48 sectors at LBA = 0x007627d0 = 7743440 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 80 80 27 76 e0 00 00:24:03.500 READ DMA c8 00 80 80 27 76 e0 00 00:24:03.500 READ DMA c8 00 80 80 2a 76 e0 00 00:24:02.200 READ DMA c8 00 0b f9 28 76 e0 00 00:24:01.300 READ DMA c8 00 0b f9 28 76 e0 00 00:24:01.000 READ DMA Error 2631 occurred at disk power-on lifetime: 2106 hours (87 days + 18 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 60 a0 27 76 e0 Error: ICRC, ABRT 96 sectors at LBA = 0x007627a0 = 7743392 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 80 80 27 76 e0 00 00:24:03.500 READ DMA c8 00 80 80 2a 76 e0 00 00:24:02.200 READ DMA c8 00 0b f9 28 76 e0 00 00:24:01.300 READ DMA c8 00 0b f9 28 76 e0 00 00:24:01.000 READ DMA c8 00 80 00 29 76 e0 00 00:23:58.700 READ DMA Error 2630 occurred at disk power-on lifetime: 2106 hours (87 days + 18 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 40 40 29 76 e0 Error: ICRC, ABRT 64 sectors at LBA = 0x00762940 = 7743808 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 80 00 29 76 e0 00 00:23:58.700 READ DMA c8 00 80 00 29 76 e0 00 00:23:58.700 READ DMA c8 00 80 00 29 76 e0 00 00:23:58.700 READ DMA c8 00 80 00 29 76 e0 00 00:23:58.700 READ DMA c8 00 80 00 2b 76 e0 00 00:23:56.400 READ DMA SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 11991 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.