SKB
Dabbler
- Joined
- Jul 22, 2020
- Messages
- 21
Hi,
the plan was, to make my VM pool bigger - from 500GB to 1TB.
I have a pool for VM's, which had 2 disk mirrored - i removed 1 of the disks (500GB) and added 1 new (1TB).
It was resilvering in around 15 mins - but after restarting and attaching the next 1TB it told me, that the boot-pool, which is on a SSD has some i/o failures, which is/was not true.
So i reverted back to the old setup with 2 500GB NVME's but only one of them is recognized. Its SDC.
After that, I erased both new 1TB Samsung 980 via BIOS and they are also showing up in BIOS. Further i formated the other 500GB Disk, to be able, to add it back to the pool, but as you can see, its not showing up anymore. All 3 Samsung NVME's are not showing up anymore. Only the "old" NVM which now holds alone my VM's.
What i also did, for a quick test, i installed a fresh Truenas Scale on another SSD, booted it up and id showed all NVME's. In there, i again formatted them, uploaded my configuration from the other on and rebooted. Now, its again only showing the SDC and none of the Samsung NVME's
The MB is Asrock X570M Pro with AMD Ryzen 5 4600G
Could you assist here, please?
the plan was, to make my VM pool bigger - from 500GB to 1TB.
I have a pool for VM's, which had 2 disk mirrored - i removed 1 of the disks (500GB) and added 1 new (1TB).
It was resilvering in around 15 mins - but after restarting and attaching the next 1TB it told me, that the boot-pool, which is on a SSD has some i/o failures, which is/was not true.
So i reverted back to the old setup with 2 500GB NVME's but only one of them is recognized. Its SDC.
root@truenas[~]# lsblk
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
sda 8:0 0 931.5G 0 disk
├─sda1 8:1 0 2G 0 part
│ └─md127 9:127 0 2G 0 raid1
│ └─md127 253:0 0 2G 0 crypt [SWAP]
└─sda2 8:2 0 929.5G 0 part
sdb 8:16 0 931.5G 0 disk
├─sdb1 8:17 0 2G 0 part
│ └─md127 9:127 0 2G 0 raid1
│ └─md127 253:0 0 2G 0 crypt [SWAP]
└─sdb2 8:18 0 929.5G 0 part
sdc 8:32 0 476.9G 0 disk
├─sdc1 8:33 0 2G 0 part
└─sdc2 8:34 0 474.9G 0 part
sdd 8:48 0 232.9G 0 disk
├─sdd1 8:49 0 1M 0 part
├─sdd2 8:50 0 512M 0 part
├─sdd3 8:51 0 216.4G 0 part
└─sdd4 8:52 0 16G 0 part
sde 8:64 0 931.5G 0 disk
├─sde1 8:65 0 2G 0 part
└─sde2 8:66 0 929.5G 0 part
zd0 230:0 0 50G 0 disk
zd16 230:16 0 50G 0 disk
zd32 230:32 0 10G 0 disk
zd48 230:48 0 20G 0 disk
zd64 230:64 0 20G 0 disk
After that, I erased both new 1TB Samsung 980 via BIOS and they are also showing up in BIOS. Further i formated the other 500GB Disk, to be able, to add it back to the pool, but as you can see, its not showing up anymore. All 3 Samsung NVME's are not showing up anymore. Only the "old" NVM which now holds alone my VM's.
What i also did, for a quick test, i installed a fresh Truenas Scale on another SSD, booted it up and id showed all NVME's. In there, i again formatted them, uploaded my configuration from the other on and rebooted. Now, its again only showing the SDC and none of the Samsung NVME's
The MB is Asrock X570M Pro with AMD Ryzen 5 4600G
Could you assist here, please?
Last edited: