Remote installation hangs
Hello Forum,
I'm trying to install FreeNAS 9.10 remotely on server located a few 100km away.
The Server consists of Supermicro X11SSM-F (with IPMI BMC), Adaptec 6805 Controller, 2 SSDs configured as hardware RAID1 and 6 4TB Segate Disks as JBODS).
I'm mounting the ISO via the 'Virtual Media'-Option of the IPMI-Console and boot the server. The FresNAS installation starts but after a while it stops with the following messages:
The last messages is repeated with differnt second counts five times. Afterwards the installation stops completely.
Btw: A test install of Ubuntu 16.04 works perfectly.
Any hints what I can do without using my car?
Hello Forum,
I'm trying to install FreeNAS 9.10 remotely on server located a few 100km away.
The Server consists of Supermicro X11SSM-F (with IPMI BMC), Adaptec 6805 Controller, 2 SSDs configured as hardware RAID1 and 6 4TB Segate Disks as JBODS).
I'm mounting the ISO via the 'Virtual Media'-Option of the IPMI-Console and boot the server. The FresNAS installation starts but after a while it stops with the following messages:
Code:
... umass0: SCSI <endor 0x0ea0 product 0x1111, class 0/0, rev 2.00/2..00 addr 3> on usbbus0 umass0: SCSI over Bulk-Only: quirks = 0x0100 umass0:5:0:-1: Attached to scbus5 run_interrupt_driven_hooks: still waiting 60 secons for xpt_config ...
The last messages is repeated with differnt second counts five times. Afterwards the installation stops completely.
Btw: A test install of Ubuntu 16.04 works perfectly.
Any hints what I can do without using my car?
Last edited: