Hello,
i have a pool named MAM3STORAGE disappeared. A disk (/dev/da3) is failed.
if i run zpool import i see:
root@freenas:~ # zpool import
pool: MAM3STORAGE
id: 11955718184966211849
state: UNAVAIL
status: One or more devices are missing from the system.
action: The pool cannot be imported. Attach the missing
devices and try again.
see: http://illumos.org/msg/ZFS-8000-3C
config:
MAM3STORAGE UNAVAIL insufficient replicas
gptid/9c0f6016-b151-11ea-ad16-00221992349f ONLINE
17607277059273223469 UNAVAIL cannot open
gptid/9c649b6c-b151-11ea-ad16-00221992349f ONLINE
If i run smartctl smartctl -a /dev/da3 i see:
smartctl 7.0 2018-12-30 r4883 [FreeBSD 11.3-RELEASE-p9 amd64] (local build)
Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Vendor: SEAGATE
Product: ST3146855SS
Revision: S527
Compliance: SPC-3
Logical Unit id: 0x5000c5001311dc13
Serial number: 3LN7JTPN
Device type: disk
Transport protocol: SAS (SPL-3)
Local Time is: Tue Feb 14 16:32:19 2023 CET
device is NOT READY (e.g. spun down, busy)
A mandatory SMART command failed: exiting. To continue, add one or more '-T permissive' options.
I have some chanches to recover my data?
i have a pool named MAM3STORAGE disappeared. A disk (/dev/da3) is failed.
if i run zpool import i see:
root@freenas:~ # zpool import
pool: MAM3STORAGE
id: 11955718184966211849
state: UNAVAIL
status: One or more devices are missing from the system.
action: The pool cannot be imported. Attach the missing
devices and try again.
see: http://illumos.org/msg/ZFS-8000-3C
config:
MAM3STORAGE UNAVAIL insufficient replicas
gptid/9c0f6016-b151-11ea-ad16-00221992349f ONLINE
17607277059273223469 UNAVAIL cannot open
gptid/9c649b6c-b151-11ea-ad16-00221992349f ONLINE
If i run smartctl smartctl -a /dev/da3 i see:
smartctl 7.0 2018-12-30 r4883 [FreeBSD 11.3-RELEASE-p9 amd64] (local build)
Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Vendor: SEAGATE
Product: ST3146855SS
Revision: S527
Compliance: SPC-3
Logical Unit id: 0x5000c5001311dc13
Serial number: 3LN7JTPN
Device type: disk
Transport protocol: SAS (SPL-3)
Local Time is: Tue Feb 14 16:32:19 2023 CET
device is NOT READY (e.g. spun down, busy)
A mandatory SMART command failed: exiting. To continue, add one or more '-T permissive' options.
I have some chanches to recover my data?