Hi, All,
I finished setting up with FreeNAS 9.3.1 stable, VMware 5.5x2 hosts and iSCSI (1TB data)
The NICs are on board and vendor is Realtek (8111e). I have CIFS and iSCSI data and they are separated configured. re0 is assigned as CIFS and re1 is assigned as iSCSI. However, I have gotten re1 watchdog timeout error when I tried to do "clone" or change memory settings on Vmware client. The issue was solved when the system was rebooted. I tried to search for this issue, and I have found some articles. For instance, set switch option like "-tso" or "hw.xxx.allow_asf="0". I really appreciate if you have some hints for this issue.
MB: asrock Z68
Mem: 16GB
HD: WD red (3TBx5) with RaidZ2
iSCSI: 1TB (around 600GB has been used)
Regards,
I finished setting up with FreeNAS 9.3.1 stable, VMware 5.5x2 hosts and iSCSI (1TB data)
The NICs are on board and vendor is Realtek (8111e). I have CIFS and iSCSI data and they are separated configured. re0 is assigned as CIFS and re1 is assigned as iSCSI. However, I have gotten re1 watchdog timeout error when I tried to do "clone" or change memory settings on Vmware client. The issue was solved when the system was rebooted. I tried to search for this issue, and I have found some articles. For instance, set switch option like "-tso" or "hw.xxx.allow_asf="0". I really appreciate if you have some hints for this issue.
MB: asrock Z68
Mem: 16GB
HD: WD red (3TBx5) with RaidZ2
iSCSI: 1TB (around 600GB has been used)
Regards,