Hi Everyone
I am looking at upgrading my home lab to 10GB Networking, and I am running into issues with TrueNAS Scale working correctly
I did already purchase an Intel X520-DA2 SFP+ NIC but upon further research and testing, it appears to be a fake as TrueNAS Scale does not see the card
and there is no YottaMark present on the card.
I was wondering if you guys could look over this list and see if you can spot anything that would be a red flag?
My current setup specs are
OS, TrueNAS Scale Buefin 22.12.3.3
Hardware
Chassis: Dell PowerEdge R720XD
CPU: 1 x Intel Xeon E5-2650 V2
RAM: 64GB (4x16GB) PC3-14900R 2Rx4 ECC
Hard Drives: 12 x 6TB 7.2K Dell SAS Drives in Raid Z3
NIC: Dell Broadcom 5720 Quad port
Power Supply: 2 x 750W HS 80+
I am looking at upgrading my home lab to 10GB Networking, and I am running into issues with TrueNAS Scale working correctly
I did already purchase an Intel X520-DA2 SFP+ NIC but upon further research and testing, it appears to be a fake as TrueNAS Scale does not see the card
and there is no YottaMark present on the card.
I was wondering if you guys could look over this list and see if you can spot anything that would be a red flag?

INTEL X520-DA2 10GB SFP+ PCI-E NETWORK CARD, NETWORK CARD, DELL 10GB, 10GB | eBay
<p dir="ltr" style="margin-top:0; margin-bottom:0;">INTEL X520-DA2 10GB SFP+ PCI-E NETWORK CARD, NETWORK CARD, DELL 10GB, 10GB.</p> <br> <p dir="ltr" style="margin-top:0; margin-bottom:0;">Low profile adaptor only</p> <br> <p dir="ltr" style="margin-top:0; margin-bottom:0;">Pulled from working...
www.ebay.com.au
My current setup specs are
OS, TrueNAS Scale Buefin 22.12.3.3
Hardware
Chassis: Dell PowerEdge R720XD
CPU: 1 x Intel Xeon E5-2650 V2
RAM: 64GB (4x16GB) PC3-14900R 2Rx4 ECC
Hard Drives: 12 x 6TB 7.2K Dell SAS Drives in Raid Z3
NIC: Dell Broadcom 5720 Quad port
Power Supply: 2 x 750W HS 80+