Bhoot
Patron
- Joined
- Mar 28, 2015
- Messages
- 241
Hello all. So I just started replacing the second HDD on my freeNAS box. The first one was resilvered without much (or any issues) but this time the story is quite different. I followed the manual "Offline"d the faulty disk>Pulled it out>Put the new disk in and clicked "replace". Now as I remember the last time I did these steps I reached a pop up with a drop down menu with the replaced hard disk showing. This time its blank. :(. The steps are exactly what I followed before just a different result. Please find the pic attached and also the zpool status. Appreciate any help. thanks
Code:
[root@freenas] ~# zpool status -v
pool: bhoot
state: DEGRADED
status: One or more devices has been taken offline by the administrator.
Sufficient replicas exist for the pool to continue functioning in a
degraded state.
action: Online the device using 'zpool online' or replace the device with
'zpool replace'.
scan: scrub repaired 768K in 73h30m with 0 errors on Mon Jan 18 04:30:12 2016
config:
NAME STATE READ WRITE CKSUM
bhoot DEGRADED 0 0 0
raidz2-0 DEGRADED 0 0 0
15718430655639808529 OFFLINE 0 0 0 was /dev/gptid/cce1f2ca-e4d8-11e4-b39d-f07959376c84
gptid/cd427285-e4d8-11e4-b39d-f07959376c84 ONLINE 0 0 0
gptid/cda4f9a1-e4d8-11e4-b39d-f07959376c84 ONLINE 0 0 0
gptid/ce06b19f-e4d8-11e4-b39d-f07959376c84 ONLINE 0 0 0
gptid/ce69a75d-e4d8-11e4-b39d-f07959376c84 ONLINE 0 0 0
gptid/4cfc6072-b5e0-11e5-8742-f07959376c84 ONLINE 0 0 0
gptid/cf2dd08e-e4d8-11e4-b39d-f07959376c84 ONLINE 0 0 0
gptid/cf91d6e8-e4d8-11e4-b39d-f07959376c84 ONLINE 0 0 0
errors: No known data errors
pool: freenas-boot
state: ONLINE
scan: none requested
config:
NAME STATE READ WRITE CKSUM
freenas-boot ONLINE 0 0 0
da0p2 ONLINE 0 0 0
errors: No known data errors