blueI5land
Dabbler
- Joined
- Oct 30, 2021
- Messages
- 41
So my power supply died and I replaced it on my truenas machine
Had trouble diagnosing but one of my internal MB cables was the culprit and before I figured out it was the cable, I tried everything else including resetting the CMOS.
Keep in mind the system was working perfectly fine, I had it set up as a network drive and everything was great.
So now I'm trying to get truenas to boot but it won't seem to boot. So far here's what I've done:
I have 4, two terabyte SSD discs and one SSD boot disk.
1. I tried of course in the BIOS to put the boot disk first in line to boot and it goes through as though freenas is starting, spits out few lines of code but then it stops abruptly after about 3 seconds and says "reboot and select proper boot device insert boot media in selected boot device and press a key".
2. I tried adjusting some of the BIOS settings between UEFI and Legacy, but I'm getting the same problem.
Scratching my head at this point because truenas seems to want to load, but it blinks too fast on the screen for me to read what errors I'm getting.
Maybe there's something I'm just not doing correctly with the boot order? Just trying to think outside the box maybe there's something I don't understand. but I'm into this about an hour and figured I'd throw this out on the forum.
MB is a Gigabyte GA-Z77X-UP5 TH (rev. 1.0) updated to latest.
Any help would be appreciated.
Had trouble diagnosing but one of my internal MB cables was the culprit and before I figured out it was the cable, I tried everything else including resetting the CMOS.
Keep in mind the system was working perfectly fine, I had it set up as a network drive and everything was great.
So now I'm trying to get truenas to boot but it won't seem to boot. So far here's what I've done:
I have 4, two terabyte SSD discs and one SSD boot disk.
1. I tried of course in the BIOS to put the boot disk first in line to boot and it goes through as though freenas is starting, spits out few lines of code but then it stops abruptly after about 3 seconds and says "reboot and select proper boot device insert boot media in selected boot device and press a key".
2. I tried adjusting some of the BIOS settings between UEFI and Legacy, but I'm getting the same problem.
Scratching my head at this point because truenas seems to want to load, but it blinks too fast on the screen for me to read what errors I'm getting.
Maybe there's something I'm just not doing correctly with the boot order? Just trying to think outside the box maybe there's something I don't understand. but I'm into this about an hour and figured I'd throw this out on the forum.
MB is a Gigabyte GA-Z77X-UP5 TH (rev. 1.0) updated to latest.
Any help would be appreciated.