Hello Peoples,
I removed a Pool from my Truenas server and reused those disks onto my main pool. This was done via CLI.
But on my GUI it still showing and keep getting error on scrubs.
I haven't been able to find a way to remove it from my GUI.
Any suggestions? Thanks!!!!
I removed a Pool from my Truenas server and reused those disks onto my main pool. This was done via CLI.
Code:
zpool status pool: dual state: ONLINE scan: scrub repaired 0B in 04:52:17 with 0 errors on Sun Feb 28 04:52:18 2021 config: NAME STATE READ WRITE CKSUM dual ONLINE 0 0 0 mirror-0 ONLINE 0 0 0 gptid/069b25bf-edef-11e8-b04a-a4badb0b2b3b ONLINE 0 0 0 gptid/06e23346-edef-11e8-b04a-a4badb0b2b3b ONLINE 0 0 0 mirror-1 ONLINE 0 0 0 gptid/0161acde-09ac-11eb-90c3-b82a72db6f2c ONLINE 0 0 0 gptid/016683e1-09ac-11eb-90c3-b82a72db6f2c ONLINE 0 0 0 mirror-2 ONLINE 0 0 0 gptid/f6ca48a3-bd28-11e9-8e93-a4badb0b2b3b ONLINE 0 0 0 gptid/6be654a4-0b35-11eb-a620-b82a72db6f2c ONLINE 0 0 0 mirror-3 ONLINE 0 0 0 gptid/02275816-df7f-11ea-90d8-b82a72db6f2c ONLINE 0 0 0 gptid/0a6ab19d-df7f-11ea-90d8-b82a72db6f2c ONLINE 0 0 0 mirror-4 ONLINE 0 0 0 gptid/ba936932-4d3b-11eb-a70e-b82a72db6f2c ONLINE 0 0 0 gptid/baaa53cc-4d3b-11eb-a70e-b82a72db6f2c ONLINE 0 0 0 errors: No known data errors pool: freenas-boot state: ONLINE status: Some supported features are not enabled on the pool. The pool can still be used, but some features are unavailable. action: Enable all features using 'zpool upgrade'. Once this is done, the pool may no longer be accessible by software that does not support the features. See zpool-features(5) for details. scan: scrub repaired 0B in 00:00:33 with 0 errors on Mon Mar 22 03:45:33 2021 config: NAME STATE READ WRITE CKSUM freenas-boot ONLINE 0 0 0 ada0p2 ONLINE 0 0 0 errors: No known data errors
But on my GUI it still showing and keep getting error on scrubs.
I haven't been able to find a way to remove it from my GUI.
Any suggestions? Thanks!!!!