Hi,
In my firm, We'd like to build a storage area. the Arch is as below.
1. HP DL380 G10. as TrueNAS host.
* 16G RAM
* 300G *2, RAID1, Host the TureNAS OS. These 2 HDD are connected to one RAID adapter
* 2T * 6, as local storage. These HDD are connected to the other RAID adapter
2. MSA2060, as storage pool. using Fiber+HBA adapter to reach out HP DL380.
We installed the latest version of TrueNAS, we found below 2 issues
1. Those 6 HDD cannot be recognized by TrueNAS during the OS installation, until these were grouped as RAID
2. That logical pool which was built by TrueNAS on MSA2060 is offline during OS rebooting since the TureNAS installation was completed.
about #1, I suppose this is about the RAID adapter, maybe TureNAS dose not has its driver in system.
about #2, I has no clue. as this is critical to operation. Would be very much appreciated, If I can have some advices here.
Thanks
In my firm, We'd like to build a storage area. the Arch is as below.
1. HP DL380 G10. as TrueNAS host.
* 16G RAM
* 300G *2, RAID1, Host the TureNAS OS. These 2 HDD are connected to one RAID adapter
* 2T * 6, as local storage. These HDD are connected to the other RAID adapter
2. MSA2060, as storage pool. using Fiber+HBA adapter to reach out HP DL380.
We installed the latest version of TrueNAS, we found below 2 issues
1. Those 6 HDD cannot be recognized by TrueNAS during the OS installation, until these were grouped as RAID
2. That logical pool which was built by TrueNAS on MSA2060 is offline during OS rebooting since the TureNAS installation was completed.
about #1, I suppose this is about the RAID adapter, maybe TureNAS dose not has its driver in system.
about #2, I has no clue. as this is critical to operation. Would be very much appreciated, If I can have some advices here.
Thanks