Currently using 11.2-U5. I am having issues with one of my pools named "Volume2". There was a power failure and the system had shut down inadvertently.
Upon restart, the first pool (Volume1) works fine but only one disk on the on the second pool (Volume2) is detecting on the Dashboard which is ada5.
I am getting this alert:
On Storage>Disks, the 2 disks (ada3 and ada4) are present but for some reason are unused and not integrating with Volume2:
I tried to import the disks back in Storage>Pools>Add but I am unable to go past the Import to Pool section as it is empty.
I go Import an Existing Pool>Yes, decrypt the disks, select the disks (ada3p2, ada4p2), uploaded the GELI key
I reach the section on "Select pool to import" but the import drop down is empty and it wont let me proceed if I leave it empty.
I ran the following commands on shell and I am unsure on how to proceed:
Here are the results for the smartctl -a /dev/adaX:
I will truly be grateful if someone can help.
Upon restart, the first pool (Volume1) works fine but only one disk on the on the second pool (Volume2) is detecting on the Dashboard which is ada5.
I am getting this alert:
Code:
New alerts: * Pool Volume2 state is UNAVAIL: One or more devices are faulted in response to IO failures. * New feature flags are available for volume Volume2. Refer to the "Upgrading a ZFS Pool" subsection in the User Guide "Installing and Upgrading" chapter and "Upgrading" section for more instructions. Current alerts: * Pool Volume2 state is UNAVAIL: One or more devices are faulted in response to IO failures. * New feature flags are available for volume Volume2. Refer to the "Upgrading a ZFS Pool" subsection in the User Guide "Installing and Upgrading" chapter and "Upgrading" section for more instructions.
On Storage>Disks, the 2 disks (ada3 and ada4) are present but for some reason are unused and not integrating with Volume2:
I tried to import the disks back in Storage>Pools>Add but I am unable to go past the Import to Pool section as it is empty.
I go Import an Existing Pool>Yes, decrypt the disks, select the disks (ada3p2, ada4p2), uploaded the GELI key
I reach the section on "Select pool to import" but the import drop down is empty and it wont let me proceed if I leave it empty.
I ran the following commands on shell and I am unsure on how to proceed:
Code:
root@Nasgul:~ # zpool status -v pool: Volume1 state: ONLINE scan: scrub repaired 0 in 0 days 02:15:19 with 0 errors on Mon Jul 15 06:15:20 2019 config: NAME STATE READ WRITE CKSUM Volume1 ONLINE 0 0 0 raidz1-0 ONLINE 0 0 0 gptid/1d6a658e-90ba-11e8-b39e-0cc47a6be4ee.eli ONLINE 0 0 0 gptid/1ea96684-90ba-11e8-b39e-0cc47a6be4ee.eli ONLINE 0 0 0 gptid/1f58fd9d-90ba-11e8-b39e-0cc47a6be4ee.eli ONLINE 0 0 0 errors: No known data errors pool: freenas-boot state: ONLINE scan: scrub repaired 0 in 0 days 00:13:39 with 0 errors on Fri Aug 2 03:58:39 2019 config: NAME STATE READ WRITE CKSUM freenas-boot ONLINE 0 0 0 mirror-0 ONLINE 0 0 0 da0p2 ONLINE 0 0 0 da1p2 ONLINE 0 0 0 errors: No known data errors root@Nasgul:~ # zpool status -x all pools are healthy root@Nasgul:~ # zpool import pool: Volume2 id: 4441097426616661069 state: ONLINE action: The pool can be imported using its name or numeric identifier. config: Volume2 ONLINE raidz1-0 ONLINE gptid/d18af88a-f45d-11e8-b14f-0cc47a6be4ee.eli ONLINE gptid/d21ff951-f45d-11e8-b14f-0cc47a6be4ee.eli ONLINE gptid/d2b4a71a-f45d-11e8-b14f-0cc47a6be4ee.eli ONLINE root@Nasgul:~ # diskinfo -v ada3 ada3 4096 # sectorsize 10000831348736 # mediasize in bytes (9.1T) 2441609216 # mediasize in sectors 0 # stripesize 0 # stripeoffset 2422231 # Cylinders according to firmware. 16 # Heads according to firmware. 63 # Sectors according to firmware. HGST HUH721010ALN604 # Disk descr. 1SJP88NZ # Disk ident. No # TRIM/UNMAP support 7200 # Rotation rate in RPM Not_Zoned # Zone Mode root@Nasgul:~ # diskinfo -v ada4 ada4 4096 # sectorsize 10000831348736 # mediasize in bytes (9.1T) 2441609216 # mediasize in sectors 0 # stripesize 0 # stripeoffset 2422231 # Cylinders according to firmware. 16 # Heads according to firmware. 63 # Sectors according to firmware. HGST HUH721010ALN604 # Disk descr. 1SJPT3GZ # Disk ident. No # TRIM/UNMAP support 7200 # Rotation rate in RPM Not_Zoned # Zone Mode root@Nasgul:~ # gpart show ada3 => 6 2441609205 ada3 GPT (9.1T) 6 122 - free - (488K) 128 4194304 1 freebsd-swap (16G) 4194432 2437414779 2 freebsd-zfs (9.1T) root@Nasgul:~ # gpart show ada4 => 6 2441609205 ada4 GPT (9.1T) 6 122 - free - (488K) 128 4194304 1 freebsd-swap (16G) 4194432 2437414779 2 freebsd-zfs (9.1T) root@Nasgul:~ # gpart show ada5 => 6 2441609205 ada5 GPT (9.1T) 6 122 - free - (488K) 128 4194304 1 freebsd-swap (16G) 4194432 2437414779 2 freebsd-zfs (9.1T)
Here are the results for the smartctl -a /dev/adaX:
Code:
root@Nasgul:~ # smartctl -a /dev/ada3 smartctl 6.6 2017-11-05 r4594 [FreeBSD 11.2-STABLE amd64] (local build) Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: HGST Ultrastar He10 Device Model: HGST HUH721010ALN604 Serial Number: 1SJP88NZ LU WWN Device Id: 5 000cca 26be5d9e1 Firmware Version: LHFBW2J0 User Capacity: 10,000,831,348,736 bytes [10.0 TB] Sector Size: 4096 bytes logical/physical Rotation Rate: 7200 rpm Form Factor: 3.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4 SATA Version is: SATA 3.2, 6.0 Gb/s (current: 3.0 Gb/s) Local Time is: Mon Aug 5 11:02:39 2019 AWST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x80) Offline data collection activity was never started. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 93) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: (1127) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000b 100 100 016 Pre-fail Always - 0 2 Throughput_Performance 0x0005 134 134 054 Pre-fail Offline - 96 3 Spin_Up_Time 0x0007 187 187 024 Pre-fail Always - 422 (Average 280) 4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 117 5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 0 7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0 8 Seek_Time_Performance 0x0005 128 128 020 Pre-fail Offline - 18 9 Power_On_Hours 0x0012 100 100 000 Old_age Always - 5215 10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 117 22 Helium_Level 0x0023 100 100 025 Pre-fail Always - 100 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 536 193 Load_Cycle_Count 0x0012 100 100 000 Old_age Always - 536 194 Temperature_Celsius 0x0002 166 166 000 Old_age Always - 36 (Min/Max 25/48) 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0 197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 0 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 5078 - # 2 Short offline Completed without error 00% 4915 - # 3 Extended offline Aborted by host 40% 4858 - # 4 Short offline Completed without error 00% 4780 - # 5 Short offline Completed without error 00% 4593 - # 6 Extended offline Aborted by host 40% 4525 - # 7 Short offline Completed without error 00% 4462 - # 8 Short offline Completed without error 00% 4379 - # 9 Extended offline Interrupted (host reset) 50% 4310 - #10 Short offline Completed without error 00% 4245 - #11 Short offline Completed without error 00% 4083 - #12 Extended offline Completed without error 00% 4006 - #13 Short offline Completed without error 00% 3924 - #14 Short offline Completed without error 00% 3806 - #15 Extended offline Interrupted (host reset) 50% 3740 - #16 Short offline Completed without error 00% 3671 - #17 Short offline Completed without error 00% 3499 - #18 Extended offline Completed without error 00% 3433 - #19 Short offline Completed without error 00% 3352 - #20 Short offline Completed without error 00% 3195 - #21 Extended offline Completed without error 00% 3117 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. root@Nasgul:~ # smartctl -a /dev/ada4 smartctl 6.6 2017-11-05 r4594 [FreeBSD 11.2-STABLE amd64] (local build) Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: HGST Ultrastar He10 Device Model: HGST HUH721010ALN604 Serial Number: 1SJPT3GZ LU WWN Device Id: 5 000cca 26be61550 Firmware Version: LHFBW2J0 User Capacity: 10,000,831,348,736 bytes [10.0 TB] Sector Size: 4096 bytes logical/physical Rotation Rate: 7200 rpm Form Factor: 3.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4 SATA Version is: SATA 3.2, 6.0 Gb/s (current: 3.0 Gb/s) Local Time is: Mon Aug 5 11:05:32 2019 AWST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x80) Offline data collection activity was never started. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 93) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: (1161) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000b 100 100 016 Pre-fail Always - 0 2 Throughput_Performance 0x0005 133 133 054 Pre-fail Offline - 100 3 Spin_Up_Time 0x0007 192 192 024 Pre-fail Always - 267 (Average 417) 4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 108 5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 0 7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0 8 Seek_Time_Performance 0x0005 128 128 020 Pre-fail Offline - 18 9 Power_On_Hours 0x0012 100 100 000 Old_age Always - 5158 10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 108 22 Helium_Level 0x0023 100 100 025 Pre-fail Always - 100 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 419 193 Load_Cycle_Count 0x0012 100 100 000 Old_age Always - 419 194 Temperature_Celsius 0x0002 166 166 000 Old_age Always - 36 (Min/Max 25/45) 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0 197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 0 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 5021 - # 2 Short offline Completed without error 00% 4858 - # 3 Extended offline Aborted by host 40% 4802 - # 4 Short offline Completed without error 00% 4723 - # 5 Short offline Completed without error 00% 4536 - # 6 Extended offline Aborted by host 40% 4469 - # 7 Short offline Completed without error 00% 4406 - # 8 Short offline Completed without error 00% 4323 - # 9 Extended offline Interrupted (host reset) 50% 4254 - #10 Short offline Completed without error 00% 4189 - #11 Short offline Completed without error 00% 4027 - #12 Extended offline Completed without error 00% 3950 - #13 Short offline Completed without error 00% 3867 - #14 Short offline Completed without error 00% 3749 - #15 Extended offline Interrupted (host reset) 50% 3684 - #16 Short offline Completed without error 00% 3615 - #17 Short offline Completed without error 00% 3443 - #18 Extended offline Completed without error 00% 3376 - #19 Short offline Completed without error 00% 3296 - #20 Short offline Completed without error 00% 3138 - #21 Extended offline Completed without error 00% 3062 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. root@Nasgul:~ # smartctl -a /dev/ada5 smartctl 6.6 2017-11-05 r4594 [FreeBSD 11.2-STABLE amd64] (local build) Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: HGST Ultrastar He10 Device Model: HGST HUH721010ALN604 Serial Number: 1DGK6DYZ LU WWN Device Id: 5 000cca 26cc7d266 Firmware Version: LHFBW2J0 User Capacity: 10,000,831,348,736 bytes [10.0 TB] Sector Size: 4096 bytes logical/physical Rotation Rate: 7200 rpm Form Factor: 3.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4 SATA Version is: SATA 3.2, 6.0 Gb/s (current: 3.0 Gb/s) Local Time is: Mon Aug 5 10:43:11 2019 AWST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x80) Offline data collection activity was never started. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 93) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: (1181) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000b 100 100 016 Pre-fail Always - 0 2 Throughput_Performance 0x0005 133 133 054 Pre-fail Offline - 100 3 Spin_Up_Time 0x0007 147 147 024 Pre-fail Always - 447 (Average 446) 4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 103 5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 0 7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0 8 Seek_Time_Performance 0x0005 128 128 020 Pre-fail Offline - 18 9 Power_On_Hours 0x0012 100 100 000 Old_age Always - 5159 10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 103 22 Helium_Level 0x0023 100 100 025 Pre-fail Always - 100 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 408 193 Load_Cycle_Count 0x0012 100 100 000 Old_age Always - 408 194 Temperature_Celsius 0x0002 157 157 000 Old_age Always - 38 (Min/Max 25/46) 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0 197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 0 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 5022 - # 2 Short offline Completed without error 00% 4859 - # 3 Extended offline Aborted by host 40% 4802 - # 4 Short offline Completed without error 00% 4724 - # 5 Short offline Completed without error 00% 4537 - # 6 Extended offline Aborted by host 40% 4469 - # 7 Short offline Completed without error 00% 4406 - # 8 Short offline Completed without error 00% 4323 - # 9 Extended offline Interrupted (host reset) 50% 4254 - #10 Short offline Completed without error 00% 4189 - #11 Short offline Completed without error 00% 4027 - #12 Extended offline Completed without error 00% 3951 - #13 Short offline Completed without error 00% 3868 - #14 Short offline Completed without error 00% 3750 - #15 Extended offline Interrupted (host reset) 50% 3684 - #16 Short offline Completed without error 00% 3615 - #17 Short offline Completed without error 00% 3443 - #18 Extended offline Completed without error 00% 3377 - #19 Short offline Completed without error 00% 3296 - #20 Short offline Completed without error 00% 3139 - #21 Extended offline Completed without error 00% 3062 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.
I will truly be grateful if someone can help.
Last edited: