Plugins not displaying

Nas-Diogo

Cadet
Joined
Jan 16, 2022
Messages
1

Hello​


I wanna install NextCloud for having access from work (for example). I can have access in my pc that is connect via ethernet cable and laptops via wifi, work fine.
My problem is that plugins not are displaying and i ended up with an error :


Get Plugins Failed​


" [EFAULT] Cmd('git') failed due to: exit code(128) cmdline: git clone -v https://github.com/freenas/iocage-ix-plugins.git /mnt/Storage/iocage/.plugins/github_com_freenas_iocage-ix-plugins_git stderr: 'Cloning into '/mnt/Storage/iocage/.plugins/github_com_freenas_iocage-ix-plugins_git'... fatal: unable to access 'https://github.com/freenas/iocage-ix-plugins.git/': Could not resolve host: github.com ' "

---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------


I searched for a bit and found this page ( https://www.truenas.com/docs/core/applications/plugins/manageplugins/ ). And i followed this steps :

1) "Go to Network > Interfaces, edit the intended plugin interface, and set Disable Hardware Offloading"

2) "Go to Network > Global Configuration and confirm the Default Gateway and DNS Servers addresses are correct."

DNS servers :
1) 8.8.8.8
2) 8.8.4.4
3) 1.1.1.1
My Default Gateway : Same ip adrress for connecting to the web interface so it shoud be good.

3)Open the Shell and ping an Internet address. The output confirms the system is connected to the Internet.

I get this :

1642341598878.png
 
Joined
Jan 7, 2015
Messages
1,150
Recheck your network settings from the appearance this machine isnt connected to to the net.
 
Top