Please check Network Configuration

[dragolea]

Hello guys.
I have change my FreeNAS Case with a FULL ATX,just case..hardware + FreeNAS usb Stick remained the same.
Now..it does not detect my network card.
I checked the netword card and it works well,it is not burned.
Any wifi card I plug in MyNAS it is like in 2 seconds detected,but also..no network.
Please help me out.
Thanks.

 

[Jailer]

Hardware specs please.

 

[dragolea]

Hardware specs please.

Hello Jailer.
Thank your for the reply.
My specs are:
2 gb ddr2
Dual core CPU
2 x 2 TB hard drive...
16 gb usb drive with FreeNAS

 

[m0nkey_]

Hello Jailer.
Thank your for the reply.
My specs are:
2 gb ddr2
Dual core CPU
2 x 2 TB hard drive...
16 gb usb drive with FreeNAS

We need more detail, such as the motherboard make/model, same for the NIC.

However, from what I can determine from the your hardware is not supported. FreeNAS minimum recommended RAM is 8GB, you only have 2GB. That Atheros NIC is only FastEthernet and all FastEthernet drivers were removed from the FreeNAS kernel with the release of FreeNAS 9.3 (I believe).

 

[dragolea]

We need more detail, such as the motherboard make/model, same for the NIC.

However, from what I can determine from the your hardware is not supported. FreeNAS minimum recommended RAM is 8GB, you only have 2GB. That Atheros NIC is only FastEthernet and all FastEthernet drivers were removed from the FreeNAS kernel with the release of FreeNAS 9.3 (I believe).

Thank you Monkey.
I got a virus...a RansomeWare....He wants 5000 euro for giving me the Key to my familly photos and private documents.
Because that happened..i wanted to make a NAS (Local) ..with NO internet access RAID 1, so I am sure next time my private dokuments will be safe.
I do not have so expensive NAS as you guys..because I am not a proffesional.I just need something small..LOCAL.
FreeNAS worked for me and I have transfer on the 2 TB HDD around 10 Gb of data.
If I must give up FreeNAS because i dont have a powerfull PC.....can I get my Data back?
How should I aproach this?
I made 2 pics with the Specs in detail:
Thank you.

 

[dragolea]

EDIT:
I installed FreeNAS 8.3.
Network is ok,all suported.....but I forgot to back up my Config File.
Now I am inside the 192.168.0.8 I see the 2 drives.
How can I take the data back..Import or is there some way?
Thank you.

 

[Jailer]

You're not going to get much help running a several years old, no longer supported version of FreeNAS.

If you insist on running this hardware then you might look to another OS to run it.

 

[dragolea]

You're not going to get much help running a several years old, no longer supported version of FreeNAS.

If you insist on running this hardware then you might look to another OS to run it.

Thank you Jailer.
I will look into another OS,but First I need my data back from the HDD.
How can I do that?

 

[gpsguy]

Please run zpool status from the command line and post the output here.