fisherwei
Dabbler
- Joined
- Oct 28, 2013
- Messages
- 47
I read many thread about ZIL SLOG L2ARC etc already, but I still very confusing for the how to get the best performance and low risk(data lost).
Now, I installed a ferrnas on the esxi host.
Esxi host has 32g mem, I gave 20g to freenas, and pass through a HBA card.
The HDD is 5x 2T, I created a RAIDZ volume, no l2arc, no zil etc, just 5HDD.
I also have 3 idle SSD, 1 of 120G 840evo, two of 240/256G M4/M500.
So, in my case, how to get the best performance and the lowest risk?
Btw: I must to use esxi for cost reason. And I don't have UPS.
Now, I installed a ferrnas on the esxi host.
Esxi host has 32g mem, I gave 20g to freenas, and pass through a HBA card.
The HDD is 5x 2T, I created a RAIDZ volume, no l2arc, no zil etc, just 5HDD.
I also have 3 idle SSD, 1 of 120G 840evo, two of 240/256G M4/M500.
So, in my case, how to get the best performance and the lowest risk?
Btw: I must to use esxi for cost reason. And I don't have UPS.