pauldoom
Cadet
- Joined
- Oct 23, 2012
- Messages
- 2
I have been dealing with an annoying issue with 8.3.0-RC1 and previous 8.3.0 pre-releases on my S1200BTL based server. On boot from USB (with a ISO installed system, or with a image DDed directly to USB) I get the following:
This happens with multiple brands of USB stick. 8.2.0 works fine on the same sticks. 8.3.0-RC1 works fine if installed on a standard hard drive or SSD. I have tried various settings in BIOS to no avail. (USB compatibility settings, SATA mode, disabling all MP features and booting single core, etc) This crash only happens with 8.3.0 series installed to USB.
Anyone else seeing this on a S1200BTL? (Just wanted to check before opening a bug report.)
-Paul
Code:
Trying to mount root from ufs:/dev/ufs/FreeNASs1a Fatal trap 12: page fault while in kernel mode cpuid = 0; apic id = 00 fault virtual address = 0x308 fault code = supervisor read data, page not present instruction pointer = 0x20:0xffffffff80578e0e stack pointer = 0x28:0xffffff800007c840 frame pointer = 0x28:0xffffff800007c860 code segment = base 0x0, limit 0xfffff, type 0x1b = DPL 0, pres 1, long 1, def32 0, gran 1 processor eflags = interrupt enabled, resume, IOPL = 0 current process = 1 (kernel) [thread pid 1 tid 100002 ] Stopped at _mtx_lock_sleep+0x4e: movl 0x398(%rcx),%esi db> tr Tracing pid 1 tid 100002 td 0xffffff00064c78c0 _mtx_lock_sleep() at _mtx_lock_sleep+0x4e bufobj_invalbuf() at bufobj_invalbuf+0x2ca vfs_mountroot_try() at vfs_mountroot_try+0x396 vfs_mountroot() at vfs_mountroot+0x3d1 start_init() at start_init+0x4c fork_exit() at fork_exit+0x11f fork_trampoline() at fork_trampoline+0xe --- trap 0, rip = 0, rsp = 0xffffff800007cd00, rbp = 0 ---
This happens with multiple brands of USB stick. 8.2.0 works fine on the same sticks. 8.3.0-RC1 works fine if installed on a standard hard drive or SSD. I have tried various settings in BIOS to no avail. (USB compatibility settings, SATA mode, disabling all MP features and booting single core, etc) This crash only happens with 8.3.0 series installed to USB.
Anyone else seeing this on a S1200BTL? (Just wanted to check before opening a bug report.)
-Paul