socrates324
Cadet
- Joined
- Aug 1, 2021
- Messages
- 4
Hi!
So I have a problem I've been pulling my hair out trying to figure it out.
I had an IPSec VPN running between my ISP's router (AVM Fritzbox) and my iPhone.
Now after my FTTH was installed, I decided to switch to OPNsense with OpenVPN (tun) instead of the ISP-router solution amongst other things for better VPN performance.
The OpenVPN is running, I can access EVERY host on my home network trough VPN but my TrueNAS installation. No access to services, no access to WebUI not even PING is working.
The ISP Router (Fritzbox) is still configured as the default gateway, but there is a static route in place on Fritzbox to redirect traffic with destination VPN to the OPNsense box.
Local IPv4 configuration with default gateway set to Fritzbox is present on TrueNAS. I even temporarily added a static route on the TrueNAS explicitly for the VPN traffic but that also did not help.
My configuration:
OPNsense:
---------------
OPNsense 22.7.4-amd64
FreeBSD 13.1-RELEASE-p2
OpenSSL 1.1.1q 5 Jul 2022
TrueNAS:
-----------
TrueNAS 12.0-U8.1
Any ideas what I might be missing?
Any hints/pointers would be greatly appreciated!
Cheers,
Soc
So I have a problem I've been pulling my hair out trying to figure it out.
I had an IPSec VPN running between my ISP's router (AVM Fritzbox) and my iPhone.
Now after my FTTH was installed, I decided to switch to OPNsense with OpenVPN (tun) instead of the ISP-router solution amongst other things for better VPN performance.
The OpenVPN is running, I can access EVERY host on my home network trough VPN but my TrueNAS installation. No access to services, no access to WebUI not even PING is working.
The ISP Router (Fritzbox) is still configured as the default gateway, but there is a static route in place on Fritzbox to redirect traffic with destination VPN to the OPNsense box.
Local IPv4 configuration with default gateway set to Fritzbox is present on TrueNAS. I even temporarily added a static route on the TrueNAS explicitly for the VPN traffic but that also did not help.
My configuration:
OPNsense:
---------------
OPNsense 22.7.4-amd64
FreeBSD 13.1-RELEASE-p2
OpenSSL 1.1.1q 5 Jul 2022
TrueNAS:
-----------
TrueNAS 12.0-U8.1
Any ideas what I might be missing?
Any hints/pointers would be greatly appreciated!
Cheers,
Soc