Hello,
I am completely rookie and followed some youtube videos and I just built a NAS using an old PC and two brand new Red WD 1TB each plus an old HDD as boot device.
I am transfering the files from another NAS using the robocopy command under Windows CMD.
While in copy process, I got the following error:
"One or more devices has experienced an unrecoverable error. An attempt was made to correct the error. Applications are unaffected."
I did a manual SMART test and the disk didn't pass.
What should I do now ? Could it be the SATA cable ?
Thank you
I am completely rookie and followed some youtube videos and I just built a NAS using an old PC and two brand new Red WD 1TB each plus an old HDD as boot device.
I am transfering the files from another NAS using the robocopy command under Windows CMD.
While in copy process, I got the following error:
"One or more devices has experienced an unrecoverable error. An attempt was made to correct the error. Applications are unaffected."
I did a manual SMART test and the disk didn't pass.
What should I do now ? Could it be the SATA cable ?
Thank you
Code:
root@truenas[~]# zpool status -v pool: TrueNas state: ONLINE status: One or more devices has experienced an unrecoverable error. An attempt was made to correct the error. Applications are unaffected. action: Determine if the device needs to be replaced, and clear the errors using 'zpool clear' or replace the device with 'zpool replace'. see: https://openzfs.github.io/openzfs-docs/msg/ZFS-8000-9P config: NAME STATE READ WRITE CKSUM TrueNas ONLINE 0 0 0 mirror-0 ONLINE 0 0 0 gptid/551131ec-5c1f-11ec-914a-d43d7e521ee1 ONLINE 2 0 0 gptid/552a0f8f-5c1f-11ec-914a-d43d7e521ee1 ONLINE 0 0 0 errors: No known data errors
Last edited by a moderator: