BKman
Cadet
- Joined
- Aug 8, 2023
- Messages
- 4
Hello!
Just built out a new TrueNAS host (for the first time in a while building a PC, my first TrueNAS build):
I've used SCALE latest non-beta available version (TrueNAS-SCALE-22.12.3.3 atm).
Since the build, I noticed a couple of crashes - looks like the NVME driver from the boot-pool disappears. After a reboot, system works fine until the next time. Here are the syslog messages (God bless Graylog!):
I've turned on the RAID mode for the Marvell 9172 controller and will watch how the system behaves in the coming days.
Also found a similar thread for Ubuntu kernels, not sure if it's applicable or not: https://www.mail-archive.com/kernel-packages@lists.launchpad.net/msg475194.html
Appreciate any feedback or advice.
Just built out a new TrueNAS host (for the first time in a while building a PC, my first TrueNAS build):
Fractal Design Node 804 Black Window Aluminum/Steel Micro ATX Cube Computer Case | 1 | |
WD Red Plus 12TB NAS Hard Disk Drive - 7200 RPM Class SATA 6Gb/s, CMR, 256MB Cache, 3.5 Inch - WD120EFBX | 8 | Spinning_Rust pool |
Corsair Dual SSD Mounting Bracket (3.5” Internal Drive Bay to 2.5", Easy Installation) Black | 1 | |
CORSAIR - RMe Series RM750e 80 PLUS Gold Fully Modular Low-Noise ATX 3.0 and PCIE 5.0 Power Supply - Black | 1 | |
Corsair CP-8920186 Premium Individually Sleeved SATA Cable, Black PSUs 29.5 inches | ||
SAMSUNG Electronics 870 EVO 2TB 2.5 Inch SATA III Internal SSD (MZ-77E2T0B/AM) | 2 | SSD pool |
Transcend 128GB Nvme PCIe Gen3 X4 MTE110S M.2 SSD Solid State Drive TS128GMTE110S | 1 | boot-pool |
Noctua NF-P12 redux-1700 PWM, High Performance Cooling Fan, 4-Pin, 1700 RPM (120mm, Grey) | 3 | |
Intel Optane SSD P1600X SSDPEK1A058GA01 M.2 2280 58GB PCIe 3.0 x4, NVMe 3D XPoint Enterprise Solid State Disk | 1 | Spinning_Rust pool's LOG |
Asrock Rack D1541D4U-2O8R Server Motherboard Intel Xeon D1541 SFP DDR4 ECC DIMM | 1 | |
Samsung M393A4K40BB0-CPB 32GB DDR4-2133 Memory MEM-DR432L-SL01-ER21 | 4 |
I've used SCALE latest non-beta available version (TrueNAS-SCALE-22.12.3.3 atm).
Since the build, I noticed a couple of crashes - looks like the NVME driver from the boot-pool disappears. After a reboot, system works fine until the next time. Here are the syslog messages (God bless Graylog!):
Code:
2023-08-28T16:34:14.000-07:00 truenas zed[2303824]: eid=220 class=io_failure pool='boot-pool' 2023-08-28T16:34:14.000-07:00 truenas zed[2303822]: eid=219 class=io_failure pool='boot-pool' 2023-08-28T16:34:14.000-07:00 truenas kernel: WARNING: Pool 'boot-pool' has encountered an uncorrectable I/O failure and has been suspended. 2023-08-28T16:34:14.000-07:00 truenas zed[2303820]: eid=218 class=data pool='boot-pool' priority=0 err=6 flags=0x8881 bookmark=158:59988:0:0 2023-08-28T16:34:14.000-07:00 truenas zed[2303817]: eid=217 class=data pool='boot-pool' priority=0 err=6 flags=0x808881 bookmark=158:54802:0:0 2023-08-28T16:34:14.000-07:00 truenas kernel: WARNING: Pool 'boot-pool' has encountered an uncorrectable I/O failure and has been suspended. 2023-08-28T16:34:14.000-07:00 truenas kernel: zio pool=boot-pool vdev=/dev/nvme0n1p3 error=5 type=1 offset=11820916736 size=12288 flags=180880 2023-08-28T16:34:14.000-07:00 truenas kernel: nvme0n1: detected capacity change from 250069680 to 0 2023-08-28T16:34:14.000-07:00 truenas kernel: nvme nvme0: Removing after probe failure status: -19 2023-08-28T16:34:14.000-07:00 truenas kernel: nvme 0000:08:00.0: can't change power state from D3cold to D0 (config space inaccessible) 2023-08-28T16:34:14.000-07:00 truenas kernel: nvme nvme0: controller is down; will reset: CSTS=0xffffffff, PCI_STATUS=0xffff
I've turned on the RAID mode for the Marvell 9172 controller and will watch how the system behaves in the coming days.
Also found a similar thread for Ubuntu kernels, not sure if it's applicable or not: https://www.mail-archive.com/kernel-packages@lists.launchpad.net/msg475194.html
Appreciate any feedback or advice.