mindless74
Cadet
- Joined
- Mar 29, 2023
- Messages
- 2
Hello together,
I am running TrueNAS-SCALE-22.12.1 together with a Eaton Ellipse 850 VA as UPS. This configuration worked great - until I disconnected the UPS for a few days and reconnected it. Since than the local services are running fine, but the remote service is only available for ip6. I do not use IP6, as it conflicts with my home office equipment. It also looks like the UPS is deducted twice.
I have restarted the server, NUT service, enabled and disabled remote monitoring.
What I should mention, I have tried to connect NUT to a remote UPS, without any success.
Is there a way to reset the NUT config?
Thank You
BR
Patrick
------
/var/log/syslog
Mar 30 12:54:45 truenas systemd[1]: Started Network UPS Tools - power device driver controller.
Mar 30 12:54:45 truenas systemd[1]: Starting Network UPS Tools - power devices information server...
Mar 30 12:54:45 truenas upsd[329896]: fopen /run/nut/upsd.pid: No such file or directory
Mar 30 12:54:45 truenas upsd[329896]: listening on ::0 port 3493
Mar 30 12:54:45 truenas upsd[329896]: listening on ::0 port 3493
Mar 30 12:54:45 truenas upsd[329896]: not listening on 0.0.0.0 port 3493
Mar 30 12:54:45 truenas upsd[329896]: not listening on 0.0.0.0 port 3493
Mar 30 12:54:45 truenas upsd[329896]: Connected to UPS [Eaton-850-Server]: usbhid-ups-Eaton-850-Server
Mar 30 12:54:45 truenas upsd[329896]: Connected to UPS [Eaton-850-Server]: usbhid-ups-Eaton-850-Server
Mar 30 12:54:45 truenas upsd[329897]: Startup successful
upsd.conf
admin@truenas[/etc/nut]$ sudo cat upsd.conf
LISTEN 0.0.0.0 3493
LISTEN ::0 3493
The NUT Config:
My Network config:
I am running TrueNAS-SCALE-22.12.1 together with a Eaton Ellipse 850 VA as UPS. This configuration worked great - until I disconnected the UPS for a few days and reconnected it. Since than the local services are running fine, but the remote service is only available for ip6. I do not use IP6, as it conflicts with my home office equipment. It also looks like the UPS is deducted twice.
I have restarted the server, NUT service, enabled and disabled remote monitoring.
What I should mention, I have tried to connect NUT to a remote UPS, without any success.
Is there a way to reset the NUT config?
Thank You
BR
Patrick
------
/var/log/syslog
Mar 30 12:54:45 truenas systemd[1]: Started Network UPS Tools - power device driver controller.
Mar 30 12:54:45 truenas systemd[1]: Starting Network UPS Tools - power devices information server...
Mar 30 12:54:45 truenas upsd[329896]: fopen /run/nut/upsd.pid: No such file or directory
Mar 30 12:54:45 truenas upsd[329896]: listening on ::0 port 3493
Mar 30 12:54:45 truenas upsd[329896]: listening on ::0 port 3493
Mar 30 12:54:45 truenas upsd[329896]: not listening on 0.0.0.0 port 3493
Mar 30 12:54:45 truenas upsd[329896]: not listening on 0.0.0.0 port 3493
Mar 30 12:54:45 truenas upsd[329896]: Connected to UPS [Eaton-850-Server]: usbhid-ups-Eaton-850-Server
Mar 30 12:54:45 truenas upsd[329896]: Connected to UPS [Eaton-850-Server]: usbhid-ups-Eaton-850-Server
Mar 30 12:54:45 truenas upsd[329897]: Startup successful
upsd.conf
admin@truenas[/etc/nut]$ sudo cat upsd.conf
LISTEN 0.0.0.0 3493
LISTEN ::0 3493
The NUT Config:
My Network config: