Dear TrueNAS community,
I've decided to convert my old pre-build PC into a NAS. Unfortunately, I can't get it to connect to the network (I've tried to find the solution here in the forum but was unsuccessful).
It is a fresh install of TrueNAS Core 12.0.
Specs:
i7 3770
8GB DDR3 (I know, 16 is recommended, but I've been consulted beforehand here, that it should be enough if I only use it as storage)
MB: H-Joshua-H61-uATX (and therefore RTL8171FH-CG gigabit Ethernet controller)
Router: FRITZ!Box 7490
SSD: Kingston 120GB
I've tried different cables, I've tried to set up a static IP, DHCP is activated in the router. I live in a dorm and get internet directly through the wall so I use my router purely for a local network and WiFi. I've tried to plug the NAS into the wall directly. Nothing helped.
I've tried a few other things, but I really don't know anything about networks. So please, talk to me like I'm mentally challenged and barely know what an IP address is.
During startup, one of the lines also says:
Please help me. Thank you in advance.
I've decided to convert my old pre-build PC into a NAS. Unfortunately, I can't get it to connect to the network (I've tried to find the solution here in the forum but was unsuccessful).
It is a fresh install of TrueNAS Core 12.0.
Specs:
i7 3770
8GB DDR3 (I know, 16 is recommended, but I've been consulted beforehand here, that it should be enough if I only use it as storage)
MB: H-Joshua-H61-uATX (and therefore RTL8171FH-CG gigabit Ethernet controller)
Router: FRITZ!Box 7490
SSD: Kingston 120GB
I've tried different cables, I've tried to set up a static IP, DHCP is activated in the router. I live in a dorm and get internet directly through the wall so I use my router purely for a local network and WiFi. I've tried to plug the NAS into the wall directly. Nothing helped.
I've tried a few other things, but I really don't know anything about networks. So please, talk to me like I'm mentally challenged and barely know what an IP address is.
During startup, one of the lines also says:
Code:
module_register_init: MOD_LOAD (vmm, 0xffffffff83814e60, 0) error 6
Please help me. Thank you in advance.