No access to qBT through Subnet not same as qBT

DasGoG

Dabbler
Joined
Feb 17, 2021
Messages
27
Hello!

So I have 3 subnets; 10.0.1.0, 10.0.2.0 and 192.168.1.0.
My TrueNAS is on 10.0.2.103 and anyone on 10.0.2.0, 10.0.1.0 and 192.168.1.0 can log onto the GUI of TrueNAS and access the SMB share on it. My issue is that no one outside of 10.0.2.0 can access the qBT GUI on the plugins ip/port of 10.0.2.106:8080.
I know my routes on my subnet routers and switch and ASA are all accurate as I can access the SMB and the routers GUI and the TrueNAS GUI but I am at a loss as to the qBT!
Being that the one interface on the NAS is the 10.0.1.103, is the qBT 10.0.2.106 more of a virtual kind of port? Does it need an ACL?
Sorry, I just can not figure out what to do.
 
Joined
Jan 7, 2015
Messages
1,150
My first guess is that qbt isnt letting anyone outside of your 10.0.2.0 network see the gui. Theres likely a setting in the configs to allow this. I dont use qbt but transmission has something similar called whitelist, add those subnets to it.
 

DasGoG

Dabbler
Joined
Feb 17, 2021
Messages
27
My first guess is that qbt isnt letting anyone outside of your 10.0.2.0 network see the gui. Theres likely a setting in the configs to allow this. I dont use qbt but transmission has something similar called whitelist, add those subnets to it.

Interesting I will look into that when I get home ty!
 

DasGoG

Dabbler
Joined
Feb 17, 2021
Messages
27
Well I am unsure exactly what happened but when I got home and tried to open it out of curiosity, it did so. Maybe it timed out the other day and did not learn the path or the network but it seems to work now, so not sure.
 
Top