mrreload
Dabbler
- Joined
- Jun 20, 2014
- Messages
- 17
So I upgraded to 12.0-U5 Core from U4 today. Immediately I noticed the NIC I had added to the system a couple months ago (complete failure at the time) is showing up without adding a tunable, etc.
The NIC is Asus XG-C100C 10G.
x.x.69.x/24 is primary network aq0
x.x.2.x/24 is my secondary/test network em1
Subnets are physically segregated/ separate switches
Routing between takes place on my pfSense firewall
I moved my old primary NIC on the secondary subnet and assigned a new address to it. All works in this config
I then put the new NIC with old NICs IP and am able to get to Web UI and SSH to server on this IP. x.x.69.143
BUT no other services appear to work. SMB, NFS, jails, VMs etc
I have 3 jails from plugins and 4 Bhyve VMs normally running.
Windows VM can ping the host, host can ping the VM, VM cannot ping anything beyond host nor can anything else on network ping the VM.
I did shutdown all VMs and jails to bind them to new NIC.
I also tried removing all config from em1 and restarting, same. I can access UI, not much else.
TrueNAS did auto create a bridge1 for the new NIC and the Jails appear to be attaching to it as members along with aq0.
I feel like the TrueNas host is somehow blocking or not forwarding the traffic to/from the VM/jails. I think IF I can get this solved The other services will follow suite.
I reverted to a backup to keep system in production until I can figure this out. Will likely test new NIC on secondary subnet next.
System specs are in my Sig.
The NIC is Asus XG-C100C 10G.
x.x.69.x/24 is primary network aq0
x.x.2.x/24 is my secondary/test network em1
Subnets are physically segregated/ separate switches
Routing between takes place on my pfSense firewall
I moved my old primary NIC on the secondary subnet and assigned a new address to it. All works in this config
I then put the new NIC with old NICs IP and am able to get to Web UI and SSH to server on this IP. x.x.69.143
BUT no other services appear to work. SMB, NFS, jails, VMs etc
I have 3 jails from plugins and 4 Bhyve VMs normally running.
Windows VM can ping the host, host can ping the VM, VM cannot ping anything beyond host nor can anything else on network ping the VM.
I did shutdown all VMs and jails to bind them to new NIC.
I also tried removing all config from em1 and restarting, same. I can access UI, not much else.
TrueNAS did auto create a bridge1 for the new NIC and the Jails appear to be attaching to it as members along with aq0.
I feel like the TrueNas host is somehow blocking or not forwarding the traffic to/from the VM/jails. I think IF I can get this solved The other services will follow suite.
I reverted to a backup to keep system in production until I can figure this out. Will likely test new NIC on secondary subnet next.
System specs are in my Sig.