New FreeNAS user needing help

[Basstrom]

Hi all,
First time poster however, I have been reading a LOT on here in regards on setting up my FreeNAS server.

Firstly my server specs are as follows:
CPU: AMD Athlon X2 250
MB: ASUS M4A785TM
RAM: 16Gb (8 x2) Kingston ECC Model KVR16E11/8
Network: Intel Gigabit CT Desktop Adapter PCIe
HDD: 6x 3TB Seagate NAS
PSU: Thermaltake SmartPower 550W
OS Storage: Patriot AutoBahn 8Gb
FreeNAS Version: 9.2.1.6 RC2

I was away from home last night and got the following report.
Data.local changes in mounted filesystems:
4c4
< /dev/ufs/FreeNASs1a / ufs ro 1 1
---
> /dev/ufs/FreeNASs2a / ufs ro 1 1
12a13
> storage/.system/rrd /mnt/storage/.system/rrd zfs rw,nfsv4acls 0 0
14a16
> storage/Davids_Storage /mnt/storage/Davids_Storage zfs rw,nfsv4acls 0 0

Data.local kernel log messages:
> usbd_req_re_enumerate: addr=3, set address failed! (USB_ERR_STALLED, ignored)
> ugen2.3: <Hewlett-Packard> at usbus2
> ulpt0: <Printer> on usbus2
> ulpt0: using bi-directional mode
> ugen2.3: <Hewlett-Packard> at usbus2 (disconnected)
> ulpt0: at uhub2, port 3, addr 3 (disconnected)
> ugen2.3: <Hewlett-Packard> at usbus2
> ulpt0: <Printer> on usbus2
> ulpt0: using bi-directional mode
> ugen5.2: <Kingston> at usbus5
> umass1: <Kingston DataTraveler 2.0, class 0/0, rev 2.00/0.00, addr 2> on usbus5
> umass1: SCSI over Bulk-Only; quirks = 0x4100
> umass1:9:1:-1: Attached to scbus9
> da1 at umass-sim1 bus 1 scbus9 target 0 lun 0
> da1: <Kingston DataTraveler 2.0 > Removable Direct Access SCSI-4 device
> da1: Serial Number 60A44C42669AAE211B531571
> da1: 40.000MB/s transfers
> da1: 7744MB (15859712 512 byte sectors: 255H 63S/T 987C)
> da1: quirks=0x3<NO_SYNC_CACHE,NO_6_BYTE>
> ugen5.2: <Kingston> at usbus5 (disconnected)
> umass1: at uhub5, port 1, addr 2 (disconnected)
> da1 at umass-sim1 bus 1 scbus9 target 0 lun 0
> da1: <Kingston DataTraveler 2.0 > s/n 60A44C42669AAE211B531571 detached
> (da1:umass-sim1:1:0:0): Periph destroyed

-- End of security output --

I'm running Plex and the first thing I checked was whether or not I could still stream to my mobile, I can browse the Plex Library but can't play anything which concerns me a little bit. I can however still get the TV theme music coming through which aliviates a bit of concern.

More than anything I would like some help in decyphering the security output.
I'm not concerned about the Hewlett-Packard entries because I know what they are.
I'm wondering if the USB I'm using for the OS storage is coming up as the Kingston device also.
I did restart the server yesterday after the update and again when I was diagnosing issues with CIFS, which have now been sorted.

Any help or advice would be greatly appreciated.

 

[rm-r]

if the USB you are using is 8GB "da1: 7744MB (15859712 512 byte sectors: 255H 63S/T 987C)" and the only USB drive plugged in then likely that's it - seems like you had some sort of usb bus reset or something