Hi
I recently built a new system and added 12x 20TB Seagate EXOS.
My pool is configured in a 6xRAIDz2 2vdev
I transferred 40TB of data from Synology to this pool (my plex media)
On the pool i have one dataset create media and a zvol for veeam - see below
This morning i woke up to a bunch of emails stating the pool has degraded.
I ran a short smart test and then outputted the data below. I have also kicked off a long test.
I don't understand how this brand new drive has failed in a space of a few days. Can someone advise me on what to do. The SMART test shows no errors logged.
Do I need to replace the drive?
I recently built a new system and added 12x 20TB Seagate EXOS.
My pool is configured in a 6xRAIDz2 2vdev
I transferred 40TB of data from Synology to this pool (my plex media)
On the pool i have one dataset create media and a zvol for veeam - see below
This morning i woke up to a bunch of emails stating the pool has degraded.
I ran a short smart test and then outputted the data below. I have also kicked off a long test.
Code:
root@S-STORE01[~]# smartctl -a /dev/da11 smartctl 7.2 2021-09-14 r5236 [FreeBSD 13.1-RELEASE-p7 amd64] (local build) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: ST20000NM007D-3DJ103 Serial Number: ZVT86SC8 LU WWN Device Id: 5 000c50 0e65d9382 Firmware Version: SN03 User Capacity: 20,000,588,955,648 bytes [20.0 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 7200 rpm Form Factor: 3.5 inches Device is: Not in smartctl database [for details use: -P showall] ATA Version is: ACS-4 (minor revision not indicated) SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Fri Sep 15 08:08:23 2023 BST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 249) Self-test routine in progress... 90% of test remaining. Total time to complete Offline data collection: ( 567) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: (1732) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x70bd) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 079 064 044 Pre-fail Always - 73831479 3 Spin_Up_Time 0x0003 098 098 000 Pre-fail Always - 0 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 2 5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0 7 Seek_Error_Rate 0x000f 067 060 045 Pre-fail Always - 4881657 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 161 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 2 18 Unknown_Attribute 0x000b 100 100 050 Pre-fail Always - 0 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0 188 Command_Timeout 0x0032 100 098 000 Old_age Always - 86 190 Airflow_Temperature_Cel 0x0022 059 045 000 Old_age Always - 41 (Min/Max 35/44) 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 1 193 Load_Cycle_Count 0x0032 100 100 000 Old_age Always - 278 194 Temperature_Celsius 0x0022 041 047 000 Old_age Always - 41 (0 28 0 0 0) 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x003e 200 199 000 Old_age Always - 14654 200 Multi_Zone_Error_Rate 0x0023 100 100 001 Pre-fail Always - 0 240 Head_Flying_Hours 0x0000 100 100 000 Old_age Offline - 36 (156 4 0) 241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 11889963464 242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 148687660 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Self-test routine in progress 90% 161 - # 2 Short offline Completed without error 00% 160 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.
I don't understand how this brand new drive has failed in a space of a few days. Can someone advise me on what to do. The SMART test shows no errors logged.
Do I need to replace the drive?
Last edited: