Albert Yang
Dabbler
- Joined
- Dec 23, 2013
- Messages
- 21
My platform:
ITX MB with 4 SATA port, Highpoint 2640x1 HBA card with v1.3 firmware, 8G RAM, 200W power supply.
4X Hitachi 3T disks; 4X Seagate 4T disks. 3T disk requires V12-0.85A, V5-0.45A; 4T disk requires V12-0.55A, V5-0.55A power supply.
Before this month, there were only 4*3T disks connect to motherboard directly in my platform and ran well.
Then, one disk did not work well. I took the "bad" one to another mechine, it worked and seemed no problem. I took it back and sometimes it worked.
And I add 4*4T disks to the system and connect them to the 2640x1 HBA.
Now there are my problems:
1. Why sometimes I lost one 3T disk?
2. Sometimes my HBA can find 2 disks, sometimes it find 3 disks, but till now, never find total 4disks, why?
3. When FreeNAS boot, it listed all the founded disks. But when I try to config on WebGUI, it only shows the disks connect to MB. All the disks connect to HBA is not shown. Is it means I need to add HBA driver?
4. The un-work 4T disk has 1Hz sound like "do...do...". Is it means power supply issue?
Please help me, thank you in advance!
ITX MB with 4 SATA port, Highpoint 2640x1 HBA card with v1.3 firmware, 8G RAM, 200W power supply.
4X Hitachi 3T disks; 4X Seagate 4T disks. 3T disk requires V12-0.85A, V5-0.45A; 4T disk requires V12-0.55A, V5-0.55A power supply.
Before this month, there were only 4*3T disks connect to motherboard directly in my platform and ran well.
Then, one disk did not work well. I took the "bad" one to another mechine, it worked and seemed no problem. I took it back and sometimes it worked.
And I add 4*4T disks to the system and connect them to the 2640x1 HBA.
Now there are my problems:
1. Why sometimes I lost one 3T disk?
2. Sometimes my HBA can find 2 disks, sometimes it find 3 disks, but till now, never find total 4disks, why?
3. When FreeNAS boot, it listed all the founded disks. But when I try to config on WebGUI, it only shows the disks connect to MB. All the disks connect to HBA is not shown. Is it means I need to add HBA driver?
4. The un-work 4T disk has 1Hz sound like "do...do...". Is it means power supply issue?
Please help me, thank you in advance!