BlueScreenTT
Explorer
- Joined
- Mar 26, 2018
- Messages
- 69
Hi
i posted some time ago about this problem and basicly got shot down :) because i was doing it wrong (multiple NIC on the same subnet)
So not i have changed the whole network setup.
PFSense box.
all running on bce1
Lan 192.168.90.0/24
VLAN: Guests 192.168.10.0/24
VLAN: Media 192.168.20.0/24
VLAN: IOT 192.168.30.0/24
VLAN: Surveillance 192.168.40.0/24
VLAN: Kidsphones 192.168.50.0/24
VLAN: DMZ 192.168.100.0/24
Firewall rules are set so that no VLAN can access another VLAN or LAN
Lan can access all VLAN's
Freenas
Static IP
igb0: 192.168.90.10/24 / LAN
igb1: 192.168.40.10/24 / Surveillance / storage for Camera
igb2: 192.168.20.10/24 / Media for Plex and other media streaming
igb3: 192.168.100.5/24 / DMZ for my webservers
How do i set up multiple gateways and DNS in Freenas so that i can actually get the traffic to route/work
can i use 192.168.90.1; 192.168.40.1; 192.168.20.1 and so on in the global config ?
or is the solution static routing ? and if so how ?
or am i still doing this wrong ?
\\ BlueScreenTT aka Thomas
i posted some time ago about this problem and basicly got shot down :) because i was doing it wrong (multiple NIC on the same subnet)
So not i have changed the whole network setup.
PFSense box.
all running on bce1
Lan 192.168.90.0/24
VLAN: Guests 192.168.10.0/24
VLAN: Media 192.168.20.0/24
VLAN: IOT 192.168.30.0/24
VLAN: Surveillance 192.168.40.0/24
VLAN: Kidsphones 192.168.50.0/24
VLAN: DMZ 192.168.100.0/24
Firewall rules are set so that no VLAN can access another VLAN or LAN
Lan can access all VLAN's
Freenas
Static IP
igb0: 192.168.90.10/24 / LAN
igb1: 192.168.40.10/24 / Surveillance / storage for Camera
igb2: 192.168.20.10/24 / Media for Plex and other media streaming
igb3: 192.168.100.5/24 / DMZ for my webservers
How do i set up multiple gateways and DNS in Freenas so that i can actually get the traffic to route/work
can i use 192.168.90.1; 192.168.40.1; 192.168.20.1 and so on in the global config ?
or is the solution static routing ? and if so how ?
or am i still doing this wrong ?
\\ BlueScreenTT aka Thomas
Last edited: