youpko
Cadet
- Joined
- Jul 24, 2021
- Messages
- 2
First of all I am new to TrueNAS in general and my knowledge of Linux is limited at best.
I decided to try out TrueNAS scale but I am running into a small issue with the 2 Network interfaces in my test box.
I have the two following NIC:
Both cards are working, I see both entries in the network.
But replies are send from the wrong NIC when sending request to the non-default NIC.
From the PC (the pc is an other subnet that the server networks):
My goal is to to use the 192.168.1.2/24 as a dedicated management interface and separate it from the normal data tragic that should go via the 192.168.2.2/24 interface.
As I am completly new to TrueNAS it might be the case that I just missed the option somewhere.
I decided to try out TrueNAS scale but I am running into a small issue with the 2 Network interfaces in my test box.
I have the two following NIC:
- 1G Copper (On the motherboard) (Default route)
- IP: 192.168.1.2/24
- Gateway: 192.168.1.1
- 10G Fiber (Mellanox ConnectX-3 PCIe)
- IP 192.168.2.2/24
- Gateway: 192.168.2.1
Both cards are working, I see both entries in the network.
But replies are send from the wrong NIC when sending request to the non-default NIC.
From the PC (the pc is an other subnet that the server networks):
- ping 192.168.1.2 and get reply back correctly,
- ping 192.168.2.2 the reply comes form the 192.168.1.2 interface as that is the default interface.
My goal is to to use the 192.168.1.2/24 as a dedicated management interface and separate it from the normal data tragic that should go via the 192.168.2.2/24 interface.
As I am completly new to TrueNAS it might be the case that I just missed the option somewhere.