Pandamonium
Dabbler
- Joined
- Nov 2, 2016
- Messages
- 47
Hi all,
Just wanted to ask if this is normal. I've added a second USB drive and attempted to mirror the boot USB. All seems to be going well, but it's crazily slow and now showing more than 100% complete but still going. Should I just leave it or is something wrong...?
Yep - that's now 6 hours to mirror 650MB !
BTW - the USB drives are a matched pair brought at the same time.
Thanks in advance
Paul
Just wanted to ask if this is normal. I've added a second USB drive and attempted to mirror the boot USB. All seems to be going well, but it's crazily slow and now showing more than 100% complete but still going. Should I just leave it or is something wrong...?
pool: freenas-boot
state: ONLINE
status: One or more devices is currently being resilvered. The pool will
continue to function, possibly in a degraded state.
action: Wait for the resilver to complete.
scan: resilver in progress since Fri Dec 23 12:13:02 2016
651M scanned out of 650M at 31.2K/s, (scan is slow, no estimated time)
651M resilvered, 100.27% done
config:
NAME STATE READ WRITE CKSUM
freenas-boot ONLINE 0 0 0
mirror-0 ONLINE 0 0 0
da0p2 ONLINE 0 0 0
da1p2 ONLINE 0 0 0 (resilvering)
Yep - that's now 6 hours to mirror 650MB !
BTW - the USB drives are a matched pair brought at the same time.
Thanks in advance
Paul