beltet
Dabbler
- Joined
- Sep 24, 2013
- Messages
- 26
Hi.
I'm in the process to upgrade my FreeNAS system because I haven't used ECC before and now I want to use the system for more than media(no important stuff that cant be reetainable), and want some more power for example Plex server.
So what I wonder is if you have any thoughts of thoughts of the system and what I shall think of when upgrading.
I'm quite new to FreeNAS and FreeBSD so please be gentle with me ;).
The old system:
Mobo: Asus E35M1-I Deluxe
Disks: 6x3TB WD RED
Chassis & PSU: FD Array R2 w. 300w PSU
Memory: Corsair Vengeance Low Profile DDR3 PC12800/1600MHz CL10 2x8GB (CML16GX3M2A1600C10)
No UPS
New system:
Chassis: Fractal Design Node 304
PSU: Seasonic X-460 Fanless 460W
Processor: Intel Xeon E3-1220v3
Mobo: ASRock E3C226D2I
Cooler: Noctua NH-L12 (Changed to Noctua NH-U12S because the L12 was to wide for the motherboard and covered much)
Memory: 16GB 2x8GB Samsung DDR3 PC10600/1333MHz ECC Reg(Changed to Kingston ValueRAM TS DDR3 PC12800/1600MHz ECC CL11 8GB (KVR16E11/8) because the motherboard didn't support registered ECC... my bad that i didn't know there was two types of ECC)
UPS: Eaton Powerware 3S 550 DIN
Disks: Same disks as old system.
Ok, any thougts and what is the proper way to migrate?
Sincerely
I'm in the process to upgrade my FreeNAS system because I haven't used ECC before and now I want to use the system for more than media(no important stuff that cant be reetainable), and want some more power for example Plex server.
So what I wonder is if you have any thoughts of thoughts of the system and what I shall think of when upgrading.
I'm quite new to FreeNAS and FreeBSD so please be gentle with me ;).
The old system:
Mobo: Asus E35M1-I Deluxe
Disks: 6x3TB WD RED
Chassis & PSU: FD Array R2 w. 300w PSU
Memory: Corsair Vengeance Low Profile DDR3 PC12800/1600MHz CL10 2x8GB (CML16GX3M2A1600C10)
No UPS
New system:
Chassis: Fractal Design Node 304
PSU: Seasonic X-460 Fanless 460W
Processor: Intel Xeon E3-1220v3
Mobo: ASRock E3C226D2I
Cooler: Noctua NH-L12 (Changed to Noctua NH-U12S because the L12 was to wide for the motherboard and covered much)
Memory: 16GB 2x8GB Samsung DDR3 PC10600/1333MHz ECC Reg(Changed to Kingston ValueRAM TS DDR3 PC12800/1600MHz ECC CL11 8GB (KVR16E11/8) because the motherboard didn't support registered ECC... my bad that i didn't know there was two types of ECC)
UPS: Eaton Powerware 3S 550 DIN
Disks: Same disks as old system.
Ok, any thougts and what is the proper way to migrate?
Sincerely
