Marvell 88SE9128 (SATA3)

[super-hornet]

Now that FreeNAS-8.0.1-BETA3 just released, but it still does not support the above SATA3 chip.
I hope they going to implement support for that chip.

The Marvell 88SE9128 is a SATA 3 chip and it is used in Gigabyte GA-770TA-UD3 motherboard. I have these board and I tried using IDE and as well AHCI but it still unable to detect my SATA 3 HDD (Western Digital, WD20EARX).

When I type "dmesg | grep ahci", I think the above chip is reported as:
ahci2: <AHCI SATA controller> port 0xbf00-0xbf07,0xbe00-0xbe03,0xbd00-0xbd07,0xbc00-0xbc03,0xbb00-0xbb0f mem 0xfd8ff000-0xfd8ff7ff irq 19 at device 0.0 on pci4
ahci2: [ITHREAD]
ahci2: AHCI v1.20 with 8 6Gbps ports, Port Multiplier not supported

 

[Bohs Hansen]

same chipset family as in my thread: http://forums.freenas.org/showthread.php?486-Marvell-SATA-88SE9125-88SE9120

FreeBSD 8.2 still doesn't have drivers for these chipsets afaik