Haris Bešlija
Cadet
- Joined
- Aug 5, 2014
- Messages
- 2
Hello,
I have a strange problem with FreeNAS 0.7.2 Sabanda (revision 8191):
After enabling LAGG with LACP, I have corrent configuration on Cisco switch, and switch reports that EtherChannel is OK.
ifconfig lagg0 shows MAC address with zeroes only.
Line in rc.conf is:
ifconfig_lagg0="inet 10.0.0.16/24 polling laggproto lacp laggport bce2 lagg port bce3"
After running ifconfig lagg0 laggproto lacp laggport bce2 lagg port bce3 inet 10.0.0.16 netmask 255.255.255.0 interface lagg0 will get proper MAC address from interface and it will have IP address.
(only order of subcommands for ifconfig is changed).
Changing rc.conf will not help as it will be rewritten automatically.
Upgrade is not an option.
Any idea how to solve this?
Best regards,
Haris
I have a strange problem with FreeNAS 0.7.2 Sabanda (revision 8191):
After enabling LAGG with LACP, I have corrent configuration on Cisco switch, and switch reports that EtherChannel is OK.
ifconfig lagg0 shows MAC address with zeroes only.
Line in rc.conf is:
ifconfig_lagg0="inet 10.0.0.16/24 polling laggproto lacp laggport bce2 lagg port bce3"
After running ifconfig lagg0 laggproto lacp laggport bce2 lagg port bce3 inet 10.0.0.16 netmask 255.255.255.0 interface lagg0 will get proper MAC address from interface and it will have IP address.
(only order of subcommands for ifconfig is changed).
Changing rc.conf will not help as it will be rewritten automatically.
Upgrade is not an option.
Any idea how to solve this?
Best regards,
Haris