- Joined
- Dec 8, 2017
- Messages
- 442
This morning I noticed I have been getting smbd errors every few minutes for the last day:
No other symptoms of anything wrong. I restarted SMB service and the errors stopped. Just to be safe I checked the IPMI logs and found this:
Unsure as to what Bus66 was, I looked through dmidecode and noticed this:
From what I can see, SLOT7 is the slot closest to the CPU, which is where my NIC (Chelsio T520-SO-CR) is plugged in. Is it possible I have NIC issue? I have noticed that it gets very hot, and I don't currently have active cooling on it. Could it be overheating and cause all the errors listed above?
Freenas 11.3-U2
Motherboard: X11SRM-F
Memory: MEM-DR464L-CL02-LR26
CPU: Xeon W-2125
Seasonic Focus 650W 80 Plus Gold
LSI 9305-24i (connected on slot 4)
Apr 20 12:01:40 nas kernel: pid 521 (smbd), jid 0, uid 0: exited on signal 6 (core dumped)
Apr 20 12:01:40 nas kernel: pid 522 (smbd), jid 0, uid 0: exited on signal 6 (core dumped)
Apr 20 12:01:40 nas kernel: pid 523 (smbd), jid 0, uid 0: exited on signal 6 (core dumped)
Apr 20 12:01:49 nas kernel: pid 518 (smbd), jid 0, uid 0: exited on signal 6 (core dumped)
Apr 20 12:01:59 nas kernel: pid 525 (smbd), jid 0, uid 0: exited on signal 6 (core dumped)
Apr 20 12:02:10 nas kernel: pid 541 (smbd), jid 0, uid 0: exited on signal 6 (core dumped)
Apr 20 12:02:10 nas kernel: pid 558 (smbd), jid 0, uid 0: exited on signal 6 (core dumped)
No other symptoms of anything wrong. I restarted SMB service and the errors stopped. Just to be safe I checked the IPMI logs and found this:
Unsure as to what Bus66 was, I looked through dmidecode and noticed this:
System Slot Information
Designation: CPU SLOT7 PCI-E 3.0 x 8
Type: x8 PCI Express 3 x8
Current Usage: In Use
Length: Long
ID: 7
Characteristics:
3.3 V is provided
Opening is shared
PME signal is supported
Bus Address: 0000:66:00.0
From what I can see, SLOT7 is the slot closest to the CPU, which is where my NIC (Chelsio T520-SO-CR) is plugged in. Is it possible I have NIC issue? I have noticed that it gets very hot, and I don't currently have active cooling on it. Could it be overheating and cause all the errors listed above?
Freenas 11.3-U2
Motherboard: X11SRM-F
Memory: MEM-DR464L-CL02-LR26
CPU: Xeon W-2125
Seasonic Focus 650W 80 Plus Gold
LSI 9305-24i (connected on slot 4)