Racinrandall
Cadet
- Joined
- Sep 17, 2015
- Messages
- 9
I recently built a new system using at Tyan dual Socket 2011 motherboard using the Intel Patsburg chipset.
When I run the lspci command from the shell it sees the Intel C608 dual SAS controller. However the drives that are connected to it do not show up when I try to build a pool.
I have verified the controller can see the drives. I'm guessing it is a driver issue. I found some info on FreeBSD and the use of the isci driver to support that controller. It wasn't real helpful on how to load this driver though and I'm not very well versed in how to do such things on BSD.
Any help would be greatly appreciated.
When I run the lspci command from the shell it sees the Intel C608 dual SAS controller. However the drives that are connected to it do not show up when I try to build a pool.
I have verified the controller can see the drives. I'm guessing it is a driver issue. I found some info on FreeBSD and the use of the isci driver to support that controller. It wasn't real helpful on how to load this driver though and I'm not very well versed in how to do such things on BSD.
Any help would be greatly appreciated.