Hi there! I'm encountering an issue attempting to install the latest TrueNAS CORE on a brand new system, specs listed below. I have installed TrueNAS CORE on a few systems, but am having some trouble with this one.
Basically I am able to boot into the USB installer, select "B" (or enter) from the menu to begin the install process and then... black screen with a white block in the top left corner.
I have used Rufus AND Balena on seperate attempts, as well as redownloading the image and checking the checksum. I have set secure boot to "Other OS", and the USB is connected directly to the mobo IO, not frontpanel USB.
Mobo: ASUS Z690-CREATOR
Proc: i9-13900K
RAM: Trident Z5 DDR5-6000 128GB
Desired boot drives: 2x 2TB Samsung 980 NvME drives
Install Media: Kingston Data Traveller 32GB USB 3.2
Any suggestions or tips appreciated!
Basically I am able to boot into the USB installer, select "B" (or enter) from the menu to begin the install process and then... black screen with a white block in the top left corner.
I have used Rufus AND Balena on seperate attempts, as well as redownloading the image and checking the checksum. I have set secure boot to "Other OS", and the USB is connected directly to the mobo IO, not frontpanel USB.
Mobo: ASUS Z690-CREATOR
Proc: i9-13900K
RAM: Trident Z5 DDR5-6000 128GB
Desired boot drives: 2x 2TB Samsung 980 NvME drives
Install Media: Kingston Data Traveller 32GB USB 3.2
Any suggestions or tips appreciated!