Hi,
I have a Gigabytes C246M-WU4 motherboard. It comes with 110mm M.2 slot. I also has a Intel Optane P4801X 100GB M.2 that I intend to use it as SLOG device. When I insert the intel optane M.2 into the board, it fail to boot and screen shows blank. Remove the Intel optane, it boots normally.
I try to insert Intel Optane (110mm) to a M.2 NVMe extension cable (80mm): https://www.dhgate.com/product/m-2-nvme-ssd-solid-state-drive-extension/449332923.html
The system can boot normal and detect Intel optane as /dev/nvd0.
Any ideas what could make the board fail to boot once Intel optane inserted? The Intel Optane is empty and has OS installed.
I have a Gigabytes C246M-WU4 motherboard. It comes with 110mm M.2 slot. I also has a Intel Optane P4801X 100GB M.2 that I intend to use it as SLOG device. When I insert the intel optane M.2 into the board, it fail to boot and screen shows blank. Remove the Intel optane, it boots normally.
I try to insert Intel Optane (110mm) to a M.2 NVMe extension cable (80mm): https://www.dhgate.com/product/m-2-nvme-ssd-solid-state-drive-extension/449332923.html
The system can boot normal and detect Intel optane as /dev/nvd0.
Any ideas what could make the board fail to boot once Intel optane inserted? The Intel Optane is empty and has OS installed.