Hello everyone, I am a new user of the FreeNAS system, and I am in desperate need of help.
So far, at our company, we have been using FreeNAS as a server with a standard installation, consisting of 1 SSD for the system and several HDDs in RAID, and everything was working great. We work with the INFOsys accounting software, which uses a shared folder located on the TrueNAS system. From there, the INFOsys software is accessed by all computers in our company, allowing them to access the database and make changes according to user accounts.
Some time ago, the TrueNAS Free server stopped working. I purchased a new server computer, the Intel Xeon E5 2660 V4 with 24GB of RAM. I installed TrueNAS Core on a 120GB SSD and added another 260GB SSD for shared folder space, which is only 20GB in size. The INFOsys program constantly transfers and receives many small files over the network, making it slow. However, since setting up TrueNAS Core, the INFOsys program is now at least 200% slower, and I'm not sure if the issue lies with my configuration.
Yesterday, I bought an Intel Xeon E3, installed a 120GB SSD, and an additional 512GB SSD for storage. I set up TrueNAS Scale and disabled file compression, although I'm not sure if that was a wise decision.
I would like to start from scratch if any of you can provide advice on how to proceed. Everything is connected through a 1GB/s network, while INFOsys can operate on a 100MB/s network as well.
Thank you in advance for your help.
So far, at our company, we have been using FreeNAS as a server with a standard installation, consisting of 1 SSD for the system and several HDDs in RAID, and everything was working great. We work with the INFOsys accounting software, which uses a shared folder located on the TrueNAS system. From there, the INFOsys software is accessed by all computers in our company, allowing them to access the database and make changes according to user accounts.
Some time ago, the TrueNAS Free server stopped working. I purchased a new server computer, the Intel Xeon E5 2660 V4 with 24GB of RAM. I installed TrueNAS Core on a 120GB SSD and added another 260GB SSD for shared folder space, which is only 20GB in size. The INFOsys program constantly transfers and receives many small files over the network, making it slow. However, since setting up TrueNAS Core, the INFOsys program is now at least 200% slower, and I'm not sure if the issue lies with my configuration.
Yesterday, I bought an Intel Xeon E3, installed a 120GB SSD, and an additional 512GB SSD for storage. I set up TrueNAS Scale and disabled file compression, although I'm not sure if that was a wise decision.
I would like to start from scratch if any of you can provide advice on how to proceed. Everything is connected through a 1GB/s network, while INFOsys can operate on a 100MB/s network as well.
Thank you in advance for your help.