Hi
I have gone from MacZFS to FreeNAS 9.3, and imported my zpool etc fine (I think). It shows the zpool with the volume in the GUI. However it says it's 100% full and I can't write or delete anything obviously, but it isn't full, and was working fine before exporting and importing the zpool. Tried updating zpool version, to no avail. Can anyone help?
pool: store
state: ONLINE
status: One or more devices are configured to use a non-native block size.
Expect reduced performance.
action: Replace affected devices with devices that support the
configured block size, or migrate data to a properly configured
pool.
scan: scrub repaired 0 in 10h21m with 0 errors on Mon Feb 2 10:21:48 2015
config:
NAME STATE READ WRITE CKSUM
store ONLINE 0 0 0
raidz1-0 ONLINE 0 0 0
gptid/bbde15e4-8286-4aa3-b861-1bf3c51c0172 ONLINE 0 0 0 block size: 512B configured, 4096B native
gptid/5c57f6f7-d48c-44a3-8515-7e605adb3756 ONLINE 0 0 0 block size: 512B configured, 4096B native
ada3p2 ONLINE 0 0 0 block size: 512B configured, 4096B native
ada1p2 ONLINE 0 0 0 block size: 512B configured, 4096B native
NAME SIZE ALLOC FREE EXPANDSZ FRAG CAP DEDUP HEALTH ALTROOT
store 7.28T 7.08T 199G - 55% 97% 1.00x ONLINE /mnt
are the outputs of status and list, anything else that is relevant? I understand the block size issue shouldn't matter other than performance.
Any help would be much appreciated!
I have gone from MacZFS to FreeNAS 9.3, and imported my zpool etc fine (I think). It shows the zpool with the volume in the GUI. However it says it's 100% full and I can't write or delete anything obviously, but it isn't full, and was working fine before exporting and importing the zpool. Tried updating zpool version, to no avail. Can anyone help?
pool: store
state: ONLINE
status: One or more devices are configured to use a non-native block size.
Expect reduced performance.
action: Replace affected devices with devices that support the
configured block size, or migrate data to a properly configured
pool.
scan: scrub repaired 0 in 10h21m with 0 errors on Mon Feb 2 10:21:48 2015
config:
NAME STATE READ WRITE CKSUM
store ONLINE 0 0 0
raidz1-0 ONLINE 0 0 0
gptid/bbde15e4-8286-4aa3-b861-1bf3c51c0172 ONLINE 0 0 0 block size: 512B configured, 4096B native
gptid/5c57f6f7-d48c-44a3-8515-7e605adb3756 ONLINE 0 0 0 block size: 512B configured, 4096B native
ada3p2 ONLINE 0 0 0 block size: 512B configured, 4096B native
ada1p2 ONLINE 0 0 0 block size: 512B configured, 4096B native
NAME SIZE ALLOC FREE EXPANDSZ FRAG CAP DEDUP HEALTH ALTROOT
store 7.28T 7.08T 199G - 55% 97% 1.00x ONLINE /mnt
are the outputs of status and list, anything else that is relevant? I understand the block size issue shouldn't matter other than performance.
Any help would be much appreciated!