Hi
I get this message after a disk replace... i hope you help me.
I got my zpool degraded... the zpool show one of the disks unavailables, i get it out, run SMART and surfaces checks and the disk is allright.
So i reinitialize the disk (clear firsts and lasts sectors). I put the disk, and make a zpool replace. The resilver was finished but with these:
pool: media2
state: DEGRADED
status: One or more devices has experienced an error resulting in data
corruption. Applications may be affected.
action: Restore the file in question if possible. Otherwise restore the
entire pool from backup.
see: http://www.sun.com/msg/ZFS-8000-8A
scrub: resilver completed after 0h26m with 277 errors on Wed Feb 20 18:43:22 2013
config:
NAME STATE READ WRITE CKSUM
media2 DEGRADED 0 0 978
raidz1 DEGRADED 0 0 3.72K
gptid/93b44ead-e4f3-11e1-9ac1-bcaec528164a ONLINE 5 685 0
gptid/941a2da1-e4f3-11e1-9ac1-bcaec528164a ONLINE 0 0 0
replacing DEGRADED 0 0 0
14408424784145491985 UNAVAIL 0 0 0 was /dev/gptid/a69803c7-fba1-11e1-a7a6-bcaec528164a
ada6p2 ONLINE 0 0 0 112G resilvered
gptid/94eb7026-e4f3-11e1-9ac1-bcaec528164a ONLINE 0 0 0
errors: 277 data errors, use '-v' for a list
With -v it says some files was corrupted... but the worst case is that some dirs are missing. When i do ls it says:
ls: Anime: Illegal byte sequence
ls: Anime y Cartoons.xls: Input/output error
ls: Avatar - The Legend Of Korra (2012-): Input/output error
ls: Cartoons: Input/output error
ls: Green Lantern - The Animated Series (2012-): Input/output error
ls: Metalocalypse (2006-): Input/output error
ls: Thundercats (2011-): Input/output error
ls: ____downloads2: Input/output error
./ 3d/ _ Openings _/ _! Videos !_/
../ _ Bajando _/ _ Para Probar _/
Is there a way to recover the files??
Thanks
I get this message after a disk replace... i hope you help me.
I got my zpool degraded... the zpool show one of the disks unavailables, i get it out, run SMART and surfaces checks and the disk is allright.
So i reinitialize the disk (clear firsts and lasts sectors). I put the disk, and make a zpool replace. The resilver was finished but with these:
pool: media2
state: DEGRADED
status: One or more devices has experienced an error resulting in data
corruption. Applications may be affected.
action: Restore the file in question if possible. Otherwise restore the
entire pool from backup.
see: http://www.sun.com/msg/ZFS-8000-8A
scrub: resilver completed after 0h26m with 277 errors on Wed Feb 20 18:43:22 2013
config:
NAME STATE READ WRITE CKSUM
media2 DEGRADED 0 0 978
raidz1 DEGRADED 0 0 3.72K
gptid/93b44ead-e4f3-11e1-9ac1-bcaec528164a ONLINE 5 685 0
gptid/941a2da1-e4f3-11e1-9ac1-bcaec528164a ONLINE 0 0 0
replacing DEGRADED 0 0 0
14408424784145491985 UNAVAIL 0 0 0 was /dev/gptid/a69803c7-fba1-11e1-a7a6-bcaec528164a
ada6p2 ONLINE 0 0 0 112G resilvered
gptid/94eb7026-e4f3-11e1-9ac1-bcaec528164a ONLINE 0 0 0
errors: 277 data errors, use '-v' for a list
With -v it says some files was corrupted... but the worst case is that some dirs are missing. When i do ls it says:
ls: Anime: Illegal byte sequence
ls: Anime y Cartoons.xls: Input/output error
ls: Avatar - The Legend Of Korra (2012-): Input/output error
ls: Cartoons: Input/output error
ls: Green Lantern - The Animated Series (2012-): Input/output error
ls: Metalocalypse (2006-): Input/output error
ls: Thundercats (2011-): Input/output error
ls: ____downloads2: Input/output error
./ 3d/ _ Openings _/ _! Videos !_/
../ _ Bajando _/ _ Para Probar _/
Is there a way to recover the files??
Thanks