ill make this very simple
my setup :
i5 haswell
gigabyte b85 chipset
8gb ddr3
4tb wd red
apacer 8gb usb stick
what i did
1. wrote 9.2.0.1 img on usbstick
2. booted up fine with ip 192.168.1.250
3. in webgui made very basic changes in the General tab, rebooted
4. system boot halted with complaints that config.xml on usbdrive cant be loaded/found
5. imaged again with another software and proceed to reboot back system
6. steps #2-#4 got repeated
7 inserted usbstick in different usb slots, repeatedly got number #4
how i fixed it
1. wrote 9.1.0.1 img on usbstick
2. booted up fine with ip 192.168.1.250
3. in webgui made very basic changes in the General tab, rebooted
5. rebooted several times with various setting change with no problem
6. success
out of my above hardware list i suspect ver 9.2.0.1 doesnt like b85 chipset
can anyone with b85 verify?
my setup :
i5 haswell
gigabyte b85 chipset
8gb ddr3
4tb wd red
apacer 8gb usb stick
what i did
1. wrote 9.2.0.1 img on usbstick
2. booted up fine with ip 192.168.1.250
3. in webgui made very basic changes in the General tab, rebooted
4. system boot halted with complaints that config.xml on usbdrive cant be loaded/found
5. imaged again with another software and proceed to reboot back system
6. steps #2-#4 got repeated
7 inserted usbstick in different usb slots, repeatedly got number #4
how i fixed it
1. wrote 9.1.0.1 img on usbstick
2. booted up fine with ip 192.168.1.250
3. in webgui made very basic changes in the General tab, rebooted
5. rebooted several times with various setting change with no problem
6. success
out of my above hardware list i suspect ver 9.2.0.1 doesnt like b85 chipset
can anyone with b85 verify?